Best Polybutylene Pipe Replacement Companies in Surrey

Best Polybutylene Pipe Replacement Companies in Surrey

Surrey pipe protection services

Choosing Canyon was the best decision our strata council made.'These results speak volumes about Canyon's ability to deliver not just a service, but a long-term solution for Best Polybutylene Pipe Replacement Companies in Surrey's strata properties. This means setting up barriers around work zones to prevent accidental entry and making sure that all pathways are clear of debris and equipment. Their customer service team is knowledgeable and ready to answer your questions, providing you with a clear understanding of what the replacement process entails. They'll then discuss with you the best materials for the new piping, focusing on durability, efficiency, and cost-effectiveness. Learn more about Best Polybutylene Pipe Replacement Companies in Surrey here You'll never find hidden costs in our quotes.
New pipes eliminate these concerns, ensuring your water is clean and safe to use. Our team will also lay down protective sheeting on your floors and pathways, safeguarding them against scratches and spills during the replacement process. Learn more about Surrey Polybutylene Pipe Replacement Services here. It's also wise to consider the age of your plumbing. You might notice a strange taste or discoloration in your tap water, which are telltale signs that your plumbing needs attention.

Best Polybutylene Pipe Replacement Companies in Surrey - Plumbing leak repair Surrey

  1. Surrey pipe overhaul services
  2. Surrey plumbing replacement services
  3. Surrey plumbing solutions
  4. Surrey plumbing for old houses
  5. Water line replacement Surrey
  6. Water pipe repairs Surrey
  7. Polybutylene pipe problems
  8. Affordable repiping Surrey
  9. Surrey pipe replacement contractors
  10. Surrey trenchless pipe replacement
  11. Polybutylene plumbing replacement services
  12. Plumbing replacement Surrey BC
  13. Surrey pipe leak detection
  14. Emergency plumbing services Surrey
  15. Surrey plumbing consulting

Whether you're nestled in the heart of Best Polybutylene Pipe Replacement Companies in Surrey or situated in the surrounding communities, their expanded coverage ensures that your property's plumbing needs are well within reach. Read more about Best Polybutylene Pipe Replacement Companies in Surrey here We're not just talking about a corner or two; our services span across the entire county. Since polybutylene pipes often fail internally, you mightn't see the problem until it's reflected in your costs. These pipes have a nasty habit of failing without warning, leading to leaks and, in severe cases, catastrophic water damage.
When you switch out old, worn-out polybutylene pipes, you're not just preventing potential leaks and damages; you're also ensuring that your water is cleaner and safer to use.

Best Polybutylene Pipe Replacement Companies in Surrey - Best pipe replacement Surrey

  • Plumbing system upgrades Surrey
  • Polybutylene pipe system Surrey
  • Plumbing companies Surrey BC
  • Pipe inspection Surrey
  • Pipe rerouting Surrey
  • Plumbing diagnostics Surrey
  • Surrey pipe bursting technology
  • Repiping services Surrey BC
  • Trenchless technology Surrey
  • Surrey residential plumbing
  • Surrey hydrostatic testing
  • Surrey repipe specialists
  • Surrey pipe overhaul services
  • Surrey plumbing replacement services
  • Surrey plumbing solutions
It's not just about patching up a pipe; it's about ensuring your home's integrity isn't at risk. However, each alternative comes with its considerations. Replacing polybutylene pipes is crucial for homeowners due to their high risk of failure and potential for costly damage.

Next, we'll prepare your property for the replacement, taking measures to protect your belongings and minimize dust and debris. With Canyon Property Projects Ltd., you can rest assured that this crucial update is handled with expertise and care, setting you up for a safer, more valuable home. Let's not forget the impact on property value. Consulting with a professional can help you navigate the options and make an informed decision that ensures your plumbing system's reliability and longevity. Rest assured, choosing Canyon Property Projects Ltd.

Best Polybutylene Pipe Replacement Companies in Surrey - Surrey pipe protection services

  • Surrey pipe protection services
  • Plumbing leak repair Surrey
  • Plumbing repairs Surrey
  • Polybutylene pipe consultation Surrey
  • Best pipe replacement Surrey
  • Surrey water leak detection
  • Surrey plumbing company
  • Professional plumbing contractors Surrey
  • Best plumbing services Surrey
  • Plumbing inspections Surrey
  • Pipe replacement solutions Surrey
  • Surrey sewer line replacement
  • Surrey plumbing restoration
  • Surrey home repiping specialists
  • Surrey plumbing for commercial buildings
  • Residential pipe leakage Surrey
  • Polybutylene plumbing replacement
means you're in good hands.

Recognizing these signs early can save you from a plumbing disaster. The timeframe can vary significantly based on several factors, including the size of your home, the complexity of your plumbing system, and the extent of the polybutylene piping present. Our service coverage doesn't just stop at offering replacements. John, a property manager, highlights the communication aspect. 'Canyon Property kept us in the loop every step of the way.

Polybutylene pipes, once hailed as the future of plumbing, now pose significant risks to your home's water system. It was popular because it's cheaper and easier to install than traditional copper piping. Leaks are another telltale sign. Fill it out with your details and a brief description of your needs, and one of their representatives will get back to you promptly.

Low-flow toilets, showerheads, and faucets can drastically cut down your water usage, leading to significant savings on your utility bills. Our experts will inspect your property's plumbing and provide a detailed quote and timeline. By opting for these specialized services, you're not just solving an existing problem; you're investing in the future. You might find yourself in a tough spot if your building is part of this predicament.

Citations and other links

Best Polybutylene Pipe Replacement Companies in Surrey Burst Polybutylene Pipe Replacement

Sometimes, the issues are hidden behind walls or under floors, making them harder to detect without professional help. Knowing whether you'll need to turn off the water supply or vacate certain areas of your home during the work will help you plan accordingly and minimize disruptions to your daily routine. Next, you should consider the installation of a water leak detection system. They understand the urgency and the potential risks involved, so they've streamlined their process to be as efficient and hassle-free as possible. This means they can handle your project more efficiently than if you were to tackle it yourself or hire someone less experienced.

Don't stress if you're not sure about all the details; they're there to help you figure it out. If your home was built between the 1970s and the 1990s, there's a good chance you've got polybutylene pipes.

Best Polybutylene Pipe Replacement Companies in Surrey - Surrey plumbing restoration

  • Surrey plumbing consulting
  • Polybutylene pipe warranty replacement
  • Pipe replacement systems Surrey
  • Surrey plumbing leak specialists
  • Surrey pipe insulation
  • Affordable pipe replacement Surrey
  • Affordable plumbing Surrey
  • Old pipe removal Surrey
  • Drainage services Surrey
  • Surrey pipe repair contractors
  • Pipe maintenance Surrey
  • Affordable pipe repairs Surrey
  • Surrey polybutylene plumbing experts
  • Re-piping Surrey
  • Surrey pipe repair estimates
  • Polybutylene pipe upgrade
  • Surrey plumbing technicians
In the long run, the initial investment in replacing your polybutylene pipes can save you a substantial amount of money. What sets them apart is their commitment to using the latest technology and materials that guarantee longevity.

Identifying early signs of pipe failure can save you from unexpected and costly repairs. Firstly, polybutylene reacts with chlorine in water, causing it to become brittle and crack over time. Surrey plumbing for commercial buildings Next, 'Is the replacement cost prohibitive?' We understand budget concerns, so we offer competitive pricing and clear quotes upfront. Replacing polybutylene pipes isn't just a repair; it's an investment in your home's future stability and your peace of mind.

You won't be facing any hidden charges; we're transparent about costs from the get-go. You might not be aware that many homes and businesses in Best Polybutylene Pipe Replacement Companies in Surrey are still relying on polybutylene pipes, a material once popular for its low cost but now known for its high risk of failure. This is where Canyon Property Projects Ltd. steps in, offering specialized polybutylene pipe replacement services in Best Polybutylene Pipe Replacement Companies in Surrey. It might be a good idea to fill some containers with water for essential use or schedule the work during a time when you can manage without running water for a bit.



Best Polybutylene Pipe Replacement Companies in Surrey - Surrey plumbing for commercial buildings

  • Surrey plumbing maintenance
  • Polybutylene pipe inspection Surrey
  • Pipe leak detection Surrey
  • Surrey plumbing for home renovations
  • Polybutylene pipe replacement systems
  • Plumbing leak repair Surrey
  • Pipe corrosion Surrey
  • Pipe installation Surrey
  • Surrey plumbing experts
  • Plumbing system upgrades Surrey
  • Polybutylene pipe system Surrey
  • Plumbing companies Surrey BC
  • Pipe inspection Surrey
  • Pipe rerouting Surrey
  • Plumbing diagnostics Surrey
  • Surrey pipe bursting technology
  • Repiping services Surrey BC
Best Polybutylene Pipe Replacement Companies in Surrey Burst Polybutylene Pipe Replacement
Plumbing Inspections Best Polybutylene Pipe Replacement Companies in Surrey Polybutylene Pipes

Plumbing Inspections Best Polybutylene Pipe Replacement Companies in Surrey Polybutylene Pipes

Each project undergoes a rigorous quality assurance process, where every detail is scrutinized to ensure it meets the company's high standards.

Best Polybutylene Pipe Replacement Companies in Surrey - Best pipe replacement Surrey

  • Surrey plumbing for old houses
  • Water line replacement Surrey
  • Water pipe repairs Surrey
  • Polybutylene pipe problems
  • Affordable repiping Surrey
  • Surrey pipe replacement contractors
  • Surrey trenchless pipe replacement
  • Polybutylene plumbing replacement services
  • Plumbing replacement Surrey BC
  • Surrey pipe leak detection
  • Emergency plumbing services Surrey
  • Surrey plumbing consulting
  • Polybutylene pipe warranty replacement
  • Pipe replacement systems Surrey
  • Surrey plumbing leak specialists
  • Surrey pipe insulation
To kick off your polybutylene pipe replacement project, you'll first need to schedule an initial consultation with our team. Lastly, you'll avoid the risk of sudden, catastrophic pipe failure. Enter Canyon Property Projects Ltd., a beacon of reliability for Best Polybutylene Pipe Replacement Companies in Surrey residents seeking expert polybutylene pipe replacement services.

The water damage from leaks can weaken your home's foundation and walls, necessitating major structural repairs. You're not left in the dark; they'll explain the findings and suggest the best course of action. Our experienced team will visit your property to identify the extent of polybutylene piping and evaluate the overall condition of your plumbing.

Firstly, ensure that the project plan includes clear safety protocols. Recognizing these signs early can save you from more severe and costly damage down the line. This situation's stirred a collective push towards more durable plumbing solutions, highlighting the crucial role of companies like Canyon Property Projects Ltd. Surrey water leak detection

They'll also include a list of things you might need to do to prepare, making sure there are no surprises on the day of the service.

Best Polybutylene Pipe Replacement Companies in Surrey - Plumbing inspections Surrey

  1. Trenchless technology Surrey
  2. Surrey residential plumbing
  3. Surrey hydrostatic testing
  4. Surrey repipe specialists
  5. Surrey pipe overhaul services
  6. Surrey plumbing replacement services
  7. Surrey plumbing solutions
  8. Surrey plumbing for old houses
  9. Water line replacement Surrey
  10. Water pipe repairs Surrey
  11. Polybutylene pipe problems
  12. Affordable repiping Surrey
  13. Surrey pipe replacement contractors
  14. Surrey trenchless pipe replacement
  15. Polybutylene plumbing replacement services
The real kicker? Prospective buyers are often deterred by the potential costs and hassles of repairing or replacing old plumbing systems.

Best Polybutylene Pipe Replacement Companies in Surrey polybutylene pipe repair experts

What sets Canyon Property Projects apart is their commitment to minimizing disruption to your daily life. They were once hailed for their cost-effectiveness and easy installation, but time has shown they're far from the ideal solution you'd hope for in your plumbing system.

Best Polybutylene Pipe Replacement Companies in Surrey - Pipe replacement solutions Surrey

  1. Plumbing system design Surrey
  2. Surrey plumbing maintenance
  3. Polybutylene pipe inspection Surrey
  4. Pipe leak detection Surrey
  5. Surrey plumbing for home renovations
  6. Polybutylene pipe replacement systems
  7. Plumbing leak repair Surrey
  8. Pipe corrosion Surrey
  9. Pipe installation Surrey
  10. Surrey plumbing experts
  11. Plumbing system upgrades Surrey
  12. Polybutylene pipe system Surrey
  13. Plumbing companies Surrey BC
  14. Pipe inspection Surrey
  15. Pipe rerouting Surrey
  16. Plumbing diagnostics Surrey
  17. Surrey pipe bursting technology
As you navigate this path, you'll discover that opting for eco-friendly materials and innovative plumbing technologies not only benefits the environment but also enhances your property's value and functionality. We'll then discuss our findings with you, explaining the scope of work and providing a detailed quote.

To spot them, look for any markings on the pipes, such as “PB2110”. Before we dive into the actual replacement work, we'll ensure you're fully informed about what to expect during the process. Our team's expertise ensures that we understand exactly what your property needs.

This could leave you at a disadvantage if you plan to sell your home in the future. Experiencing leaks and bursts, polybutylene pipes have become a homeowner's nightmare, signaling it's time for a crucial update. As you navigate the complexities of maintaining or updating your home, it's crucial to grasp why replacing these pipes isn't just a recommendation but a necessity.

Understanding the benefits of pipe replacement sets the stage for exploring how Canyon Property Projects Ltd ensures a seamless and thorough service. Understanding the severe consequences of ignoring aging polybutylene pipes, it's crucial to explore effective leak prevention strategies to protect your Best Polybutylene Pipe Replacement Companies in Surrey home.

Best Polybutylene Pipe Replacement Companies in Surrey - Best pipe replacement Surrey

  • Surrey sewer line replacement
  • Surrey plumbing restoration
  • Surrey home repiping specialists
  • Surrey plumbing for commercial buildings
  • Residential pipe leakage Surrey
  • Polybutylene plumbing replacement
  • Plumbing system design Surrey
  • Surrey plumbing maintenance
  • Polybutylene pipe inspection Surrey
  • Pipe leak detection Surrey
  • Surrey plumbing for home renovations
  • Polybutylene pipe replacement systems
  • Plumbing leak repair Surrey
  • Pipe corrosion Surrey
  • Pipe installation Surrey
Over time, they're prone to degrade when exposed to chlorine, a common chemical used to treat public water supplies.

Best Polybutylene Pipe Replacement Companies in Surrey polybutylene pipe repair experts
Residential Polybutylene Plumbing Replacement Best Polybutylene Pipe Replacement Companies in Surrey
Residential Polybutylene Plumbing Replacement Best Polybutylene Pipe Replacement Companies in Surrey

Don't forget the positive impact on your property's value. Our aim is to complete the work efficiently and with the least possible inconvenience to you. When you're considering selling your home or just improving its value, the type of plumbing you have plays a crucial role. You'll find their team equipped with the latest tools and materials, ensuring a swift and effective solution that stands the test of time. Best pipe replacement Surrey It's not just about preventing leaks; it's about ensuring the safety and integrity of your home's water system.

You're not just saving on potential repair costs; you're also avoiding the inconvenience and the possible hike in insurance premiums that typically follow water damage incidents. By proactively replacing these pipes, you're eliminating a major concern, making your property more attractive on the market. Moreover, we're committed to staying on the cutting edge of plumbing technology and techniques. You won't see the damage until it's too late, and by then, you're looking at costly repairs.

Many strata councils and property managers face similar challenges, but there's a beacon of hope with Canyon Property Projects Ltd.'s specialized polybutylene pipe replacement services. Well, if you've got these pipes lurking behind your walls, you're facing a ticking time bomb. Plumbing inspections Surrey From the initial assessment to the final check, they're with you every step of the way, making sure you're not just satisfied but truly relieved of any plumbing worries. Our choice of materials means you won't have to worry about the common issues associated with polybutylene piping.

Best Polybutylene Pipe Replacement Companies in Surrey - Plumbing repairs Surrey

  1. Surrey pipe repair estimates
  2. Polybutylene pipe upgrade
  3. Surrey plumbing technicians
  4. Pipe replacement for home Surrey
  5. Polybutylene plumbing replacement
  6. Plumbing system design Surrey
  7. Surrey plumbing maintenance
  8. Polybutylene pipe inspection Surrey
  9. Pipe leak detection Surrey
  10. Surrey plumbing for home renovations
  11. Polybutylene pipe replacement systems
  12. Plumbing leak repair Surrey
  13. Pipe corrosion Surrey
  14. Pipe installation Surrey
  15. Surrey plumbing experts


After the team at Canyon Property replaced her old pipes, she noticed an immediate difference in her water's clarity and taste. First off, your insurance company may not cover damages caused by polybutylene pipe failures if they've previously informed you about the risks and you've chosen not to replace them. The size of your property and the complexity of the plumbing system play significant roles in determining the completion time. Jobs are being created, and the local economy is getting a much-needed uplift.



Best Polybutylene Pipe Replacement Companies in Surrey - Surrey sewer line replacement

  1. Affordable plumbing Surrey
  2. Old pipe removal Surrey
  3. Drainage services Surrey
  4. Surrey pipe repair contractors
  5. Pipe maintenance Surrey
  6. Affordable pipe repairs Surrey
  7. Surrey polybutylene plumbing experts
  8. Re-piping Surrey
  9. Surrey pipe repair estimates
  10. Polybutylene pipe upgrade
  11. Surrey plumbing technicians
  12. Pipe replacement for home Surrey
  13. Surrey plumbing restoration
  14. Surrey home repiping specialists
  15. Surrey plumbing for commercial buildings
  16. Residential pipe leakage Surrey
  17. Polybutylene plumbing replacement
  18. Plumbing system design Surrey
Polybutylene Pipe Repair Best Polybutylene Pipe Replacement Companies in Surrey

Plus, their team ensures minimal disruption to your daily life during the replacement process, making it as seamless as possible. Instead, we go the extra mile to ensure that every replacement is done with precision and care, adhering strictly to industry standards and regulations. Professional plumbing contractors Surrey Once you give the green light, we'll schedule the replacement at a time that works for you, usually within a week or two, depending on our current workload. This upgrade can significantly boost your home's marketability and resale value. Another significant advantage is the warranty that comes with professional services.

Best Polybutylene Pipe Replacement Companies in Surrey - Best plumbing services Surrey

  • Repiping services Surrey BC
  • Trenchless technology Surrey
  • Surrey residential plumbing
  • Surrey hydrostatic testing
  • Surrey repipe specialists
  • Surrey pipe overhaul services
  • Surrey plumbing replacement services
  • Surrey plumbing solutions
  • Surrey plumbing for old houses
  • Water line replacement Surrey
  • Water pipe repairs Surrey
  • Polybutylene pipe problems
  • Affordable repiping Surrey
  • Surrey pipe replacement contractors
  • Surrey trenchless pipe replacement
  • Polybutylene plumbing replacement services
  • Plumbing replacement Surrey BC
  • Surrey pipe leak detection
  • Emergency plumbing services Surrey

After the replacement is complete, we'll conduct a thorough testing phase to guarantee that your new plumbing system is working perfectly. During this meeting, we'll discuss the layout of your property, the extent of the existing polybutylene piping, and any specific concerns you might have. If you're living in a home built during that era, there's a good chance you've got polybutylene piping. With Canyon Property Projects Ltd.'s expertise, you can make a decision that benefits your property now and in the future.
These aren't just nuisances; they're indicators that your pipes may be on their last legs. Our team of experts will handle everything, from the removal of your old polybutylene pipes to the installation of the new piping system. Canyon Property Projects Ltd.

Best Polybutylene Pipe Replacement Companies in Surrey - Surrey plumbing restoration

  • Surrey plumbing solutions
  • Surrey plumbing for old houses
  • Water line replacement Surrey
  • Water pipe repairs Surrey
  • Polybutylene pipe problems
  • Affordable repiping Surrey
  • Surrey pipe replacement contractors
  • Surrey trenchless pipe replacement
  • Polybutylene plumbing replacement services
  • Plumbing replacement Surrey BC
  • Surrey pipe leak detection
  • Emergency plumbing services Surrey
  • Surrey plumbing consulting
  • Polybutylene pipe warranty replacement
  • Pipe replacement systems Surrey
  • Surrey plumbing leak specialists
  • Surrey pipe insulation
  • Affordable pipe replacement Surrey
has expanded its services to replace these problematic pipes, offering a proactive solution to the community. You'll want to keep an eye out for signs of wear and tear.
You'll find their testimonials not only reassuring but also reflective of Canyon Property Projects Ltd.'s commitment to excellence. If you're in an area with hard water, think about adding a water softener to your system. Let's show you why we're the right choice for your polybutylene pipe replacement needs. If your home was built between the late 1970s and mid-1990s, there's a higher chance polybutylene pipes were used.

Explore Best Polybutylene Pipe Replacement Companies in Surrey here
Polybutylene Pipe Repair Best Polybutylene Pipe Replacement Companies in Surrey
Polybutylene
Names
Other names
polybutene-1, poly(1-butene), PB-1
Identifiers
ChemSpider
  • none
ECHA InfoCard 100.111.056 Edit this at Wikidata
Properties
(C4H8)n
Density 0.95 g/cm3[1]
Melting point 135 °C (275 °F; 408 K)[1]
Related compounds
Related compounds
1-butene (monomer)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Polybutylene (polybutene-1, poly(1-butene), PB-1) is a polyolefin or saturated polymer with the chemical formula (CH2CH(Et))n. Not be confused with polybutene, PB-1 is mainly used in piping.[2]

Production

[edit]

Polybutylene is produced by polymerisation of 1-butene using supported Ziegler–Natta catalysts.

Catalysts

[edit]

Isotactic PB-1 is produced commercially using two types of heterogeneous Ziegler–Natta catalysts.[3] The first type of catalyst contains two components, a solid pre-catalyst, the δ-crystalline form of TiCl3, and solution of an organoaluminum cocatalyst, such as Al(C2H5)3. The second type of pre-catalyst is supported. The active ingredient in the catalyst is TiCl4 and the support is microcrystalline MgCl2. These catalysts also contain special modifiers, organic compounds belonging to the classes of esters or ethers. The pre-catalysts are activated by combinations of organoaluminum compounds and other types of organic or organometallic modifiers. Two most important technological advantages of the supported catalysts are high productivity and a high fraction of the crystalline isotactic polymer they produce at 70–80 °C under standard polymerization conditions.[4][5][6]

Characteristics

[edit]

PB-1 is a high molecular weight, linear, isotactic, and semi-crystalline polymer. PB-1 combines typical characteristics of conventional polyolefins with certain properties of technical polymers.

PB-1, when applied as a pure or reinforced resin, can replace materials like metal, rubber and engineering polymers. It is also used synergistically as a blend element to modify the characteristics of other polyolefins like polypropylene and polyethylene. Because of its specific properties it is mainly used in pressure piping, flexible packaging, water heaters, compounding and hot melt adhesives.

Heated up to 190 °C and above, PB-1 can easily be compression moulded, injection moulded, blown to hollow parts, extruded, and welded. It does not tend to crack due to stress.[dubiousdiscuss] Because of its crystalline structure and high molecular weight, PB-1 has good resistance to hydrostatic pressure, showing very low creep even at elevated temperatures.[7] It is flexible, resists impact well and has good elastic recovery.[3][8]

Isotactic polybutylene crystallizes in three different forms. Crystallization from solution yields form-III with the melting point of 106.5 °C. Cooling from the melt results in the form II which has melting point of 124 °C and density of 0.89 g/cm3. At room temperature, it spontaneously converts into the form-I with the melting point of 135 °C and density of 0.95 g/cm3.[1]

PB-1 generally resists chemicals such as detergents, oils, fats, acids, bases, alcohol, ketones, aliphatic hydrocarbons and hot polar solutions (including water).[3] It shows lower resistance to aromatic and chlorinated hydrocarbons as well as oxidising acids than other polymers such as polysulfone and polyamide 6/6.[7] Additional features include excellent wet abrasion resistance, easy melt flowability (shear thinning), and good dispersion of fillers. It is compatible with polypropylene, ethylene propylene rubbers, and thermoplastic elastomers.

Some properties:[7]

Application areas

[edit]

Piping systems

[edit]

The main use of PB-1 is in flexible pressure piping systems for hot and cold drinking water distribution, pre-insulated district heating networks and surface heating and cooling systems. ISO 15876 defines the performance requirements of PB-1 piping systems.[9] PB-1's most notable characteristics are weldability, temperature resistance, flexibility and high hydrostatic pressure resistance. The material can be classified PB 125 with a minimum required strength (MRS) of 12.5 MPa. Other features include low noise transmission, low linear thermal expansion, no corrosion and calcification.

PB-1 piping systems are no longer being sold in North America (see "Class action lawsuits and removal from building code approved usage", below). The overall market share in Europe and Asia is rather small but PB-1 piping systems have shown a steady growth in recent years. In certain domestic markets, e.g. Kuwait, the United Kingdom, Korea and Spain, PB-1 piping systems have a strong position.[8]

Plastic packaging

[edit]

Several PB-1 grades are commercially available for various applications and conversion technologies (blown film, cast film, extrusion coating). There are two main fields of application:

  • Peelable easy-to-open packaging where PB-1 is used as blend component predominantly in polyethylene to tailor peel strength and peel quality, mainly in alimentary consumer packaging and medical packaging.
  • Lowering seal initiation temperature (SIT) of high speed packaging polypropylene based films. Blending PB-1 into polypropylene, heat sealing temperatures as low as 65 °C can be achieved, maintaining a broad sealing window and good optical film properties.

Hot melt adhesives

[edit]

PB-1 is compatible with a wide range of tackifier resins. It offers high cohesive and adhesive strength and helps tailoring the "open time" of the adhesive (up to 30 minutes) because of its slow crystallisation kinetics. It improves the thermal stability and the viscosity of the adhesive.[10]

Compounding and masterbatches

[edit]

PB-1 accepts very high filler loadings in excess of 70%. In combination with its low melting point it can be employed in halogen-free flame retardant composites or as masterbatch carrier for thermo-sensitive pigments. PB-1 disperses easily in other polyolefins, and at low concentration, acts as processing aid reducing torque and/or increasing throughput.

Thermal insulation

[edit]

PB-1 can be foamed.[11] The use of PB-1 foam as thermal insulation is of great advantage for district heating pipes, since the number of materials in the sandwich structure is reduced to one, facilitating its recycling.[12]

Other applications

[edit]

Other applications include domestic water heaters, electrical insulation, compression packaging, wire and cable, shoe soles, and polyolefin modification (thermal bonding, enhancing softness and flexibility of rigid compounds, increasing temperature resistance and compression set of soft compounds).

Environmental longevity

[edit]

Plumbing and heating systems made from PB-1 have been used in Europe and Asia for more than 30 years. First reference projects in district heating and floor heating systems in Germany and Austria from the early 1970s are still in operation today.[8]

One example is the installation of PB-1 pipes in the Vienna Geothermal Project (1974) where aggressive geothermal water is distributed at a service temperature of 54 °C and 10 bar pressure. Other pipe materials in the same installation failed or corroded and had been replaced in the meantime.[8]

International standards set minimum performance requirements for pipes made from PB-1 used in hot water applications. Standardized extrapolation methods predict lifetimes in excess of 50 years at 70 °C and 10 bar.[8]

Class action lawsuits and removal from building code approved usage

[edit]

Polybutylene plumbing was used in several million homes built in the United States from around 1978 to 1997. Problems with leaks and broken pipes led to a class action lawsuit, Cox v. Shell Oil, that was settled for $1 billion.[13][14] The leaks were associated with degradation of polybutylene exposed to chlorinated water.[15]

Polybutylene water pipes are no longer accepted by the United States building codes and have been the subject[16] of class action lawsuits in both Canada and the U.S.[17][18] The National Plumbing Code of Canada 1995 listed polybutylene piping as acceptable for use with the exception of recirculation plumbing. The piping was removed from the acceptable for use list in the 2005 issue of the standard.[19]

In Australia in March 2023, the Department of Mines, Industry Regulation and Safety reported that Australian homes built in 2019-2020 that had used a certain brand of polybutylene piping, had become the subject of an enquiry due to the significance of water leaks reported.[20][21]

There is evidence to suggest that the presence of chlorine and chloramine compounds in municipal water (often deliberately added to retard bacterial growth) will cause deterioration of the internal chemical structure of polybutylene piping and the associated acetal fittings.[22] The reaction with chlorinated water appears to be greatly accelerated by tensile stress, and is most often observed in material under highest mechanical stress such as at fittings, sharp bends, and kinks. Localized stress whitening of the material generally accompanies and precedes decomposition of the polymer. In extreme cases, this stress-activated chemical "corrosion" can lead to perforation and leakage within a few years, but it also may not fail for decades. Fittings with a soft compression seal can give adequate service life.[further explanation needed]

Because the chemical reaction of the water with the pipe occurs inside the pipe, it is often difficult to assess the extent of deterioration. The problem can cause both slow leaks and pipe bursting without any previous warning indication. The only long-term solution is to completely replace the polybutylene plumbing throughout the entire building.[23]

See also

[edit]

References

[edit]
  1. ^ a b c Mark Alger, Mark S. M. Alger (1997). Polymer science dictionary. Springer. p. 398. ISBN 978-0-412-60870-4.
  2. ^ Whiteley, Kenneth S.; Heggs, T. Geoffrey; Koch, Hartmut; Mawer, Ralph L.; Immel, Wolfgang (2000). "Polyolefins". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a21_487. ISBN 978-3527306732.
  3. ^ a b c d Charles A. Harper (2006). Handbook of plastics technologies: the complete guide to properties and performance. McGraw-Hill Professional. p. 17. ISBN 978-0-07-146068-2.
  4. ^ Hwo, Charles C.; Watkins, Larry K. Laminated film with improved tear strength, European Patent Application EP0459742, Publication date 12/04/1991
  5. ^ Boo-Deuk Kim et al. (2008) U.S. patent 7,442,489
  6. ^ Shimizu, Akihiko; Itakura, Keisuke; Otsu, Takayuki; Imoto, Minoru (1969). "Monomer-isomerization polymerization. VI. Isomerizations of butene-2 with TiCl3 or Al(C2H5)3–TiCl3 catalyst". Journal of Polymer Science Part A: Polymer Chemistry. 7 (11): 3119. Bibcode:1969JPoSA...7.3119S. doi:10.1002/pol.1969.150071108.
  7. ^ a b c d Freeman, Andrew; Mantell, Susan C.; Davidson, Jane H. (2005). "Mechanical performance of polysulfone, polybutylene, and polyamide 6/6 in hot chlorinated water". Solar Energy. 79 (6): 624–37. Bibcode:2005SoEn...79..624F. doi:10.1016/j.solener.2005.07.003.
  8. ^ a b c d e Polybutylene Archived November 30, 2006, at the Wayback Machine
  9. ^ ISO 15876-1:2003 iso.org
  10. ^ T.E. Rolando (1998). Solvent-Free Adhesives. iSmithers Rapra. p. 35. ISBN 978-1-85957-133-0.
  11. ^ Doyle, Lucía (2022-03-20). "Extrusion foaming behavior of polybutene-1. Toward single-material multifunctional sandwich structures". Journal of Applied Polymer Science. 139 (12). doi:10.1002/app.51816. ISSN 0021-8995.
  12. ^ Doyle Gutierrez, Lucia (2022-12-02). A Circular Economy Approach to Multifunctional Sandwich Structures: Polymeric Foams for District Heating Pre-Insulated Pipes (Thesis thesis). HafenCity Universität Hamburg. doi:10.34712/142.35.
  13. ^ Hensler, Deborah R.; Pace, Nicholas M.; Dombey-Moore, Bonita; Giddens, Beth; Gross, Jennifer; Moller, Erik K. (2000). "Polybutylene Plumbing Pipes Litigation: Cox v. Shell Oil". In Hensler, Deborah R. (ed.). Class action dilemmas: pursuing public goals for private gain. Santa Monica, CA: RAND Institute for Civil Justice. pp. 375–98. ISBN 978-0-8330-2601-9.
  14. ^ Schneider, Martin (November 21, 1999). "Pipe problem getting fixed". The Baltimore Sun. Archived from the original on 2012-06-04. Retrieved 2010-07-29.
  15. ^ Vibien, P.; Couch, J.; Oliphant, K.; Zhou, W.; Zhang, B.; Chudnovsky, A. (2001). "Assessing material performance in chlorinated potable water applications" (PDF). Book Institute of Materials. 759: 863–72. ISSN 1366-5510. Archived from the original (PDF) on 2010-06-22. Retrieved 2010-07-30. also published as: Vibien, P.; Couch, J.; Oliphant, K.; Zhou, W.; Zhang, B.; Chudnovsky, A. (2001). "Chlorine resistance testing of cross-linked polyethylene piping materials". ANTEC 2001 Proceedings. Boca Raton: CRC Press. pp. 2833–9. ISBN 978-1-58716-098-1.
  16. ^ Pipe dream is nightmare for many, Miami Herald - September 12, 1993
  17. ^ "DuPont USA Settlement of the Canadian Class Action Lawsuits". Archived from the original on 2011-07-06. Retrieved 2010-10-01.
  18. ^ Polybutylene Plumbing Pipe Leak Relief
  19. ^ "Polybutylene (Poly-B) Pressure Water Piping" (PDF). municipalaffairs.alberta.ca. Government of Alberta. 2012-01-06. Retrieved 2019-09-09.
  20. ^ "Information for owners of new homes with polybutylene plumbing pipes" (PDF). commerce.wa.gov.au. March 21, 2023. Archived (PDF) from the original on 12 November 2023. Retrieved November 12, 2023.
  21. ^ Batajtis, Damian (27 March 2023). "Comprehensive Guide to polybutylene Piping Issues and Solutions in Australia". Wizard Leak Detection. Archived from the original on 12 November 2023. Retrieved November 12, 2023.
  22. ^ Cause of failure in polybutylene pipe & acetal fittings http://www.polybutylene.com/poly.html
  23. ^ "Polybutylene Piping". PropEx.com. Archived from the original on 2015-08-29. Retrieved 2015-07-17.

Further reading

[edit]

A contractor[1][2] (North American English) or builder (British English),[3][4] is responsible for the day-to-day oversight of a construction site, management of vendors and trades, and the communication of information to all involved parties throughout the course of a building project.[5]

In the United States, a contractor may be a sole proprietor managing a project and performing labor or carpentry work, have a small staff, or may be a very large company managing billion dollar projects. Some builders build new homes, some are remodelers, some are developers.[6]

Description

[edit]

A general contractor is a construction manager employed by a client, usually upon the advice of the project's architect or engineer.[7] General Contractors are mainly responsible for the overall coordination of a project and may also act as building designer and construction foreman (a tradesman in charge of a crew).

A general contractor must first assess the project-specific documents (referred to as a bid, proposal, or tender documents). In the case of renovations, a site visit is required to get a better understanding of the project. Depending on the project delivery method, the general contractor will submit a fixed price proposal or bid, cost-plus price or an estimate. The general contractor considers the cost of home office overhead, general conditions, materials, and equipment, as well as the cost of labor, to provide the owner with a price for the project.

Contract documents may include drawings, project manuals (including general, supplementary, or special conditions and specifications), and addendum or modifications issued prior to proposal/bidding and prepared by a design professional, such as an architect.The general contractor may also assume the role of construction manager, responsible for overseeing the project while assuming financial and legal risks.There are several types of risks can occur include cost overruns, delays, and liabilities related to safety or contract breaches.

Prior to formal appointment, the selected general contractor to whom a client proposes to award a contract is often referred to as a "preferred contractor".[8]

Responsibilities

[edit]

A general contractor is responsible for providing all of the material, labor, equipment (such as heavy equipment and tools) and services necessary for the construction of the project. A general contractor often hires specialized subcontractors to perform all or portions of the construction work. When using subcontractors, the general contractor is responsible for overseeing the quality of all work performed by any and all of the workers and subcontractors.

It is a best practice for general contractors to prioritize safety on the job site, and they are generally responsible for ensuring that work takes place following safe practices.

A general contractor's responsibilities may include applying for building permits, advising the person they are hired by, securing the property, providing temporary utilities on site, managing personnel on site, providing site surveying and engineering, disposing or recycling of construction waste, monitoring schedules and cash flows, and maintaining accurate records.[9]

The general contractor may be responsible for some part of the design, referred to as the "contractor's design portion" (JCT terminology).[10]

United Kingdom, Commonwealth and Australia usage

[edit]

In the United Kingdom, Australia and some British Commonwealth countries, the term 'general contractor' was gradually superseded by builders during the early twentieth century.[citation needed] This was the term used by major professional, trade, and consumer organizations when issuing contracts for construction work, and thus the term 'general contractor' fell out of use except in large organizations where the main contractor is the top manager and a general contractor shares responsibilities with professional contractors.

General contractors who conduct work for government agencies are often referred to as "builders". This term is also used in contexts where the customer's immediate general contractor is permitted to sub-contract or circumstances are likely to involve sub-contracting to specialist operators e.g. in various public services.

United States and Asia usage

[edit]

In the United States and Asia, the terms general contractor (or simply "contractor"), prime contractor and main contractor are often interchangeable when referring to small local companies that perform residential work. These companies are represented by trade organizations such as the NAHB.[11]

Prime contractor

[edit]

Prime contractor is a term defined in the US law.[12][13] Statutory definitions of prime contract, prime contractor, subcontract, and subcontractor are in 41 U.S.C. § 8701.[14] The prime contractor term was already defined before the 8 March 1946 passage of An Act To eliminate the practice by subcontractors, under cost-plus-a-fixed-fee or cost reimbursable contacts of the United States, of paying fees or kick-backs, or of granting gifts or gratuities to employees of a cost-plus-a-fixed-fee or cost reimbursable prime contractors or of higher tier subcontractors for the purpose of securing the award of subcontracts or orders. (Pub. L.Tooltip Public Law (United States) 79–319, 60 Stat. 37)

Licensing requirements

[edit]

Licensing requirements to work legally on construction projects vary from locale to locale. In the United States, there are no federal licensing requirements to become a general contractor, but most US states require general contractors to obtain a local license to operate. It is the states' responsibility to define these requirements: for example, in the state of California, the requirements are stated as follows:

With a few exceptions, all businesses or individuals who work on any building, highway, road, parking facility, railroad, excavation, or other structure in California must be licensed by the California Contractors State License Board (CSLB) if the total cost of one or more contracts on the project is $500 or more.

In every state that requires a license, a surety bond is required as part of the licensing process, with the exception of Louisiana, where bonding requirements may vary in different parishes. Not all states require General Contractor licenses - these include Vermont, New Hampshire and Maine, among others.

Licensing qualifications

[edit]

Some general contractors obtain bachelor's degrees in construction science, building science, surveying, construction safety, or other disciplines.

General Contractors often learn about different aspects of construction, including masonry, carpentry, framing, and plumbing. Aspiring general contractors communicate with subcontractors and may learn the management skills they need to run their own company.

Experience in the construction industry as well as references from customers, business partners, or former employers are demanded. Some jurisdictions require candidates to provide proof of financing to own their own general contracting firm.

General Contractors often run their own business. They hire subcontractors to complete specialized construction work and may manage a team of plumbers, electricians, bricklayers, carpenters, iron workers, technicians, handymans, architects and roofers. General Contractors build their business by networking with potential clients, buying basic construction tools, and ensuring that their subcontractors complete high-quality work. General Contractors do not usually complete much construction work themselves, but they need to be familiar with construction techniques so they can manage workers effectively. Other reasons include access to specialist skills, flexible hiring and firing, and lower costs.

General contractor example

[edit]

A property owner or real estate developer develops a program of their needs and selects a site (often with an architect). The architect assembles a design team of consulting engineers and other experts to design the building and specify the building systems. Today contractors frequently participate on the design team by providing pre-design services such as providing estimations of the budget and scheduling requirements to improve the economy of the project. In other cases, the general contractor is hired at the close of the design phase. The owner, architect, and general contractor work closely together to meet deadlines and budget. The general contractor works with subcontractors to ensure quality standards; subcontractors specialise in areas such as electrical wiring, plumbing, masonry, etc.

See also

[edit]

References

[edit]
  1. ^ Davies, Nikolas, and Erkki Jokiniemi. Architect's illustrated pocket dictionary. Oxford: Architectural Press, 2011. 289. Print.
  2. ^ "Collins Dictionary".
  3. ^ "Merriam-Webster".
  4. ^ "Builder vs. Construction Manager".
  5. ^ Hendrickson, Chris. & Au, Tung (2000), The Design and Construction Process. Project Management for Construction: Fundamental Concepts for Owners, Engineers, Architects and Builders, chapter 3
  6. ^ "What's the difference between a developer and a builder?". Chicago Tribune. 2005-01-23. Retrieved 2023-07-18.
  7. ^ Shekhar, R. K. (2005), Academic Dictionary of Architecture, Delhi: Isha Books, 69
  8. ^ Law Insider Inc., Preferred Contractor(s definition [sic], accessed 21 March 2023
  9. ^ Allen, Edward, & Iano Joseph (2009). Fundamentals of Building Construction Materials and Methods. 5th ed. Hoboken, N.J.: John Wiley & Sons.
  10. ^ Joint Contracts Tribunal, Intermediate Building Contract with contractor’s design (ICD), current edition 2019, accessed 7 July 2021
  11. ^ "About NAHB". www.nahb.org. Retrieved 2023-07-18.
  12. ^ Nicastro 2023, p. 1.
  13. ^ Carril & Duggan 2020.
  14. ^ Nicastro 2023, p. 1, Note 5.

Sources

[edit]

Frequently Asked Questions

Yes, you've got financing options or payment plans available when considering a full polybutylene pipe replacement project. It's best to discuss directly with them to understand the terms that fit your strata council's budget.

Having polybutylene pipes in your home can raise your insurance premiums or even affect your eligibility for coverage, as insurers view them as high-risk for leaks and water damage, potentially costing you more.

After you've replaced your pipes, it's crucial to regularly check for leaks, insulate them to prevent freezing, and avoid chemical drain cleaners. Also, have a professional inspect your system annually to ensure it's in top shape.