Band Saws Canada

Band Saw Industrial

How you plan to use your saw will impact the layout, shape and spacing for the teeth. Let's review the most commonly used tooth patterns.

You should decide what you are going to use the saw for before you purchase a band saw.

There are many types and sizes available on the market for band saw blades. Each one is designed for a different purpose.

For example, you can use the bandsaw for cutting large pieces of lumber into small fence pieces.

Band Saw 16 Inch

It uses blades with a minimum width 1/8 inch and has dimensions of 17-1/2 inches by 22-1/2 in.

For this application you will first need to drill a hole into the wood. Next, you'll thread the blade through this hole. Once you have threaded the blade through the hole, you are ready to start cutting.

Band Saw 16 Inch
Wilton Band Saw 7014

Wilton Band Saw 7014

It includes a magnetic on/off switch and dual mounting positions to allow for an optional pro light system to be mounted to illuminate the work area.

When the band saw first appeared, it was intended to be used in ripping lumber. This is why people still use it.

Industrial Vertical Band Saws

This skill bandsaw will work well for you if you are looking for a 9-inch band saw. This benchtop bandsaw is portable and can be used in small workshops.

It measures in at 13 inches. This vertical clearance is ideal for expanding your supply of costly boards. You will also receive a 6-in. resaw fencing and a bar. (Resaw or drift bars support boards and compensates against blade drift.

Axminster Bandsaw
Axminster Bandsaw

This saw is driven using an electricmotor. It has a pulley, belt and drive. It makes it easy to adjust speed or make adjustments.

The wheels are also made out of heavy cast-iron, which gives the blades more momentum, making it easier and faster to cut through hard materials.

Band Saws Canada
Why do band saw blades break

You can use the same saw to cut metal and wood, it's true! The only thing you need is the right blade.

The machine became extremely popular with builders as well as lumberyards when it was first commercially produced.

Check our other pages :

Frequently Asked Questions

The majority of problems with wood burning are caused by a dull saw blade. These blades might not be sharp enough for efficient cutting of wood and create enough friction to heat the wood. This is what it means. This makes it harder to cut the wood, and causes friction when you pass the material through.

While using a bandsaw, or any other powered saw, drill press, planer, do not wear gloves. Gloves will not protect your hands and give you a false sense security. If the material is caught, the gloves could actually cause your fingers to be pulled into the blade.

The band saw can be used for cutting curves in thick lumber such as to create cabriole legs or to rip lumber. It can also be used to crosscut small pieces. However, the most common use of the band saw is to cut irregular shapes. Resawing lumber into smaller slabs is the second most popular use of the band saw.

The blade should be as broad as the machine allows, but narrow enough to cut the desired shape (radius) for cutting curves or radii. The blade should be as broad as the machine allows for straight cutting. To promote straighter and more precise cuts, the beam strength of the blade should be wider than it is.

Commercial bandsaws can vibrate if the wheels aren't perfectly round or slightly off-center. Tires that were not evenly stretched at the time they were installed are often to blame.