Technical Sidemount Scuba Dive Training Office

Technical Sidemount Course

SidemountPCB is a type of scuba equipment that has diving tubes mounted on the sides of the diver. They are located below the shoulders and along their hips. It was first popularized by cave divers who can penetrate smaller sections of cave and can change tanks with greater ease. Divers who do technical wreck diving penetrations have also discovered the same benefits when operating in restricted spaces. We have qualified instructors who can teach scuba diver training in Thailand.

A stone’s throw from our shoreline, you can experience being surrounded by miles of our BEAUTIFUL BARRIER REEF system in less than 15 feet of water. Classes and private guides are available to provide your once in a lifetime moment.

Start studying right away by getting the PADI Sidemount PB Diver and Tec Sidemount PB Diver Manual from your local PADI Dive Shop. If you are certified as a recreational sidemount diver, Chapters Two and three will be your focus. If not you will read the entire manual.

If you are ready to learn SCUBA Diving, register here to take your Open Water Diver course. For continuing education, visit us in store to help develop a pathway to achieve your diving goals.

What should I avoid after scuba diving

Your instructor series, Steve/Vas is amazing. Let me be the first one to tell you that you are absolutely correct. You can learn SM by simply watching the videos, as I did. But, I had to compromise/sacrifice some of my learning curves without you (SM essentials instructor). To get proficient with AL80s, it took me nearly a year. Then, I... read moreSteve/Vas. Your instructor series is amazing. Let me be the first one to tell you that you are right in everything you have said. You can learn SM by simply watching the videos, as I did. But, I had to compromise/sacrifice some of my learning curves without you (SM essentials instructor). To get proficient with AL80s, it took me nearly a year. The first level of tech diving was taken by me a year later. I told my instructor that I was using SM configuration. He was shocked that I did not teach myself. I told him, and he replied with "You most likely will need to take a SM workshop together depending on how well I do on dive one". He said that there was no reason to have you take a class after the first dive. Your online training is excellent, but I'd rather see Joe Seda if it was all over again. I will continue to learn from him in the future. Regards Tony read less

This course will teach you about sidemount diving, and how to create a tec sidemount helmet. One confined water session, four open water sessions and hands-on training are included. You will start with two tanks and expand to at least two additional tanks.

Technical Sidemount Scuba Dive Training Office
What should I avoid after scuba diving
Technical Sidemount Scuba Dive Training Manual

Technical Sidemount Scuba Dive Training Manual

Blue Label Diving can offer Sidemount PCB Diving Courses in all levels from SSI to TDI to PADI in Phuket Thailand. From recreational side mount diving with two tanks, to advanced technical sidemounting within overhead environments, and even instructor-level sidemounting. You may not want to dive backmount again once you've learned side mount diving.

You can immediately get the PADI Sidemount PB Diver manual and the Tec Sidemount PB Diver manual from your local PADI Dive Shop. You'll only need Chapters Two through Three if you are a recreational sidemount diver. If not, you can read the whole manual.

Water

Hi Steve, I really enjoyed your Sidemount PCB Essentials course in Gozo! Have probably never spend my money on anything better. It made so much fun and I enjoyed every single minute of it. Seeing your dedication and experience is simply amazing. You pay attention to the smallest details and you are always striving to improve things even further. I also... read moreHi Steve, I really enjoyed your Sidemount PCB Essentials course in Gozo! Have probably never spend my money on anything better. It made so much fun and I enjoyed every single minute of it. Seeing your dedication and experience is simply amazing. You pay attention to the smallest details and you are always striving to improve things even further. I also love your enthusiasm to capture all those details, new equipment, new methods, hints etc. with the camera to be able to include them in upcoming videos to the benefit of everyone. Speaking of your online training videos I must say that they are a class of its own. They definitely get you well-prepared for the things you need to know during the in-water training and I think that exactly this concept is the key to the steep learning curve because the time underwater can be used efficiently. Thank you so much for everything Steve! Cheers, Nils read less

Be aware of what you're paying: All prices include instruction and eLearning. The cost of eLearning by itself can range from $140 to $280. A $640 course purchased from us may cost you the same as $500 purchased from someone else, if you need to pay for elearning separately.

Years
Years

If the course is successfully completed, graduates may participate in sidemount diving activities under supervision as long as they follow these rules:

Upon successful completion of this course, graduates may engage in sidemount diving activities without direct supervision, provided the following limits are adhered to:

Can you dive 47 meters down

I've never tried sidemounting before but I learned a lot from his online training and I was confident in my abilities. I was correct! It was truly a life changing week! The sidemountpcb essentials course far exceeded my expectations. Steve is a great teacher with a lot of patience. I was not wrong! It was truly a life changing week! Sidemount PCB Essentials far exceeded my expectations. Steve is a great teacher. His patience is amazing and he puts in a lot time and effort with his students. Every aspect of the lesson is well planned and executed with great care. It was both memorable and rewarding. Sidemount PCB Essentials Course was a transformative experience for me. In such a short time, I was able to increase my awareness and improve my skills below water. Everything is in its right place, from the harness set-up, to the weight and position of the swimmers, to the cylinder trim and to your balance in the water. You feel more confident, relaxed, and have a true sidemount setup. This course was both challenging and very enjoyable. Each day starts with a planning and theoretical session. We end with a video review about what we did in the water. This is where all details are discussed. It was a tedious process to drain the cylinders before we could go into the water. This is why our learning curve has been so steep. Everything was handled in a calm and secure environment, yet with remarkable professionalism. Steve's course is worth it. Steve will assist you in achieving more than you could ever imagine if Sidemount PCB is your passion. read less

This was an enlightening experience that I had with your online course. While I've had limited experiences with other instructors over my scuba "career", I can honestly say I've never seen so many practical, useful and deep explanations of how to become a better diver. I had difficulty with buoyancy control while trying to take my PADI AOW course. While I had limited experiences with instructors in my scuba "career", I can honestly say I have never experienced such useful, deep, and practical explanations of how to become a better diver. My buoyancy control was an issue when I attempted to shoot my SMB during my PADI AOW course. My instructor told me how to improve my buoyancy. He suggested that I just practice. He did have a good buoyancy, but didn’t explain to me how important proper weighting and breath control are. Your videos were eye opening. I was also surprised that none of my diving buddies understood why I wanted sidemount. Even highly-recommended instructors have questions about why I dive sm. It is what does it do? This is what cave divers do. I'm very glad that I chose sm. It is an entirely different world. While nobody really taught me or inspected how I do SM diving, I have been praised by others for my good trim. I learned everything through your videos. How to set up my equipment and how to exit or enter water. Also, how solve problems. I would love to have a training session with you, and we could meet. This is because I want others to be better divers. There are many outstanding instructors and divers out, but I'm sure your contribution is enormous and important to the scuba diving industry. I am grateful for this! Regards, Csaba read less

Check our other pages :

Frequently Asked Questions

332.35 m
Hello and welcome to the Officially Amazing universe. Ahmed Gabr. Ahmed, 41, of Egypt, has broken the record for the deepest SCUBA dive, diving 332.35 m (1,090 ft 4.5 in) in the Red Sea off the coast of Dahab.

from 130 to 148 feet
Those who are already decompression certified can immediately qualify for rebreather decompression dives. Individual training agencies set depth limits ranging from 130 to 148 feet (40 to 45 meters).

A typical diver, at a typical depth, with a typical tank

Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.