Steve, I want to thank all sections of your online courses. It was worth the effort. I learned a lot more online than my brain could comprehend. Your videos are clearer than any book or other material. I'm going to be repeating the most important lessons in the water course. Regards Rafal
We can offer the SDI course if requested. However, we only offer the TDI course by default. This can be taken as a stand-alone program, but our students usually combine it with the Apprentice Cave Diver course.
Technical Sidemount Scuba Dive Training AgenciesSidemount PCB Diving originated in cave diving's early days. Lamar Hires was the first to make use of multiple tanks in such a compact way that they could reach places that back-mounted divers couldn't. This technique has been gaining popularity and is now one of our fastest-growing areas.
For items such as primary and cylinder lights that may prove difficult to transport, rental is possible. We will be happy to assist you if you have any questions.
Sidemount PCB offers many benefits to any diver, but it's especially useful for cave diving. (It was actually cave divers that invented sidemount. These are just some of the benefits.
Certification cards: We issue these only when earned. Simply taking part in a course does not guarantee certification. For cave courses, certification cards from multiple training agencies may be available. C-cards generally cost around $30 each, depending on agency. Your instructor can tell you more.
One of the most important changes in equipment cave divers have made since the start of the century was the switch from sidemount to backmounted doubles. Sidemount is a popular choice for cave divers. It's also possible that sidemount cave divers are more common than backmount cave divers.
Sidemount PCB is a configuration that allows you to scuba dive with cylinders attached along the side of the diver. Instead of being on the back, the cylinders are placed below the shoulders and along your hips. Because smaller sections of cave are possible to penetrate, and tanks can be easily changed, it was initially popular with cave divers. Technical wreck diving divers also saw the benefits of operating in small spaces. Thai instructors are highly qualified to instruct scuba diving classes and scuba dive training.
Start studying right away by getting the PADI Sidemount PB Diver and Tec Sidemount PB Diver Manual from your local PADI Dive Shop. If you are certified as a recreational sidemount diver, Chapters Two and three will be your focus. If not you will read the entire manual.
We provide courses for Recreational, Technical, Sidemount PCB, Overhead / Cave, Advanced Wreck, and Professional Development through the following agencies: SSI, SDI, TDI, ERDI, PFI, RAID.
Stage-only diving is the use of standard deco/stage cylinder configuration, without back-mounted cylinders, on an otherwise standard, or partly modified tec/rec BCD. The lower cylinder is attached to waist D-Rings and the upper cylinder to shoulder D-Rings, both via direct bolt-snap. Some divers (untrained in specific sidemount diving techniques) often incorrectly assume this approach to be sidemount diving. No bungee cord is utilised in the upper attachment, causing the cylinders to hang low beneath the diver and not in line (parallel) with their torso beneath their armpits. Without change of the BCD design, the lack of back-mounted cylinders also causes taco’ing of wing designs and much instability.
Sidemount PCB Diving developed from cave diving in the early decades. Lamar Hires, an explorer, was the first to use multiple tanks to reach places where back mounted divers were unable to. As the sport developed, sidemount PCB diving has become one the fastest growing segments.
Computer-aided instruction forms an integral part of most courses we teach. Why? The reason is simple. eLearning helps students get in the water earlier and spend more of their time there. That is why we charge no additional for any applicable online eLearning programs. These are typically $140. This can translate into an additional day in-water instruction. That is how valuable it is. Priceless.
Sidemount PCB Diving Courses are a useful stand-alone course for the technical diver who wants to become more skilled and proficient with different gear configurations regardless of if he intends to use sidemount all the time. The course may also be taught in conjunction with any of TDI’s other open-circuit specialty courses, on the condition that all prerequisites and standards applicable to both courses are fully met.
A typical diver, at a typical depth, with a typical tank
Based on personal experience, an average open-water certified diver on a 40-foot dive with a standard aluminum 80-cubic-foot tank will be able to stay down for 45 to 60 minutes before surfacing with a safe reserve of air still in the tank.
You must be a PADI Open Water Diver to enroll in the PADI Advanced Rebreather Diver course, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.