Tile grout can be difficult to clean. You have a few options if tile grout stains are difficult to remove. You can first scrub the stains with a stiff bristle brush. If that fails, you might try a commercial cleaner specifically designed for tile grout. You can also call a professional if that fails.
If you've tried these methods and the stain is still not coming out, you may need to call in a professional.
The tiles will be first removed. The area will then be thoroughly cleaned. Finally, new tiles can be installed.
Method #2: Make an acid paste with baking soda and water. Apply it to the area. Let it sit for about a minute before using a brush to scrub and then rinsing.
Professional
It is crucial to remove mold from your bathroom tiles as soon you notice it. Mold, while it may not seem important, can have serious consequences for your health.
Next, you'll need to use a chisel as well as a hammer. This will allow you to easily remove the tile.
There are a few different ways to remove floor tiles in Australia, depending on the type of tile and the adhesive that was used. If the tile is ceramic or porcelain, you can usually just score the surface with a utility knife and then pry it up. For tougher tiles, you may need to rent a power tile stripper.
If the tile is set in an adhesive, you will need to remove all of the adhesive before you can safely remove the tile. There are a few ways to do this, but one of the most effective is to use a heat gun or hair dryer to soften the adhesive. Once it's soft, you should be able to scrape it away with a putty knife.