Single-acting hydraulic punches can punch precise holes quickly and efficiently in a very short time. It has an automatic punch, returns and reset operation, which makes it suitable for many materials, including angle steel, channel and H-shapes steels and flat sheets (copper plate, aluminum and iron)
Hydraulic punches are designed to puncture metals using round, square, or oblong holes. They are designed to work on mild steel, nonferrous metals and non-shattering polymers.
This tool is perfect for fast, hydraulic punching, and pneumatic feeding.
The 35-Ton hydraulic punching machine weighs 31 pounds and punches quickly. The dual-action remover holds the material and strips it so that you can punch the next hole in just seconds. It is suitable for punching railings, I-beams, tower iron, truck frames and truck frames. The maximum tensile strength is 65,000 Psi. Mount it to your work bench, or bring it to your job site. In less than 24 hours, rectangular, square or hex tools can be ordered.
Some maintenance tips are: Always clean your punch and die. Although they don’t require lubrication to last longer, cleaning can improve their durability. Enerpac Oil should be used in both punches as well as pumps. At all times, match punch and the die. When you are performing operations, ensure that your dies have wider openings so they point downwards. Make sure you immediately change worn-out, cracked, or chipped dies. To prevent cracks when processing materials, make sure you have the right lifting force.
This 14-piece hydraulic punch set makes it easy to punch holes in steels of 11 and 16 gauges. This compact design allows you to easily take the hydraulic punch along to any jobsite. It's faster, easier, and more accurate than manual punches.
Our Porta-Punch is the quickest and easiest way to punch up to 13/16" Round Holes in 3/8" thick mild steel with a MAXIMUM tensile strength of 65,000 psi.
A few maintenance tips: Clean the punch and die regularly. While they don't require lubrication or cleaning, it can increase their durability. Only use Enerpac Oil in punches and pumps. Match the punch and die according to your needs at all times. Make sure you have larger openings for operations. You should immediately change any dies or punches that are cracked, chipped, worn out, or damaged. When processing materials, ensure you use the correct lifting force.
Gulf States Saw & Machine Co., a well-known distributor of a large range of single-acting portable hydraulic punches is designed with the highest quality materials and suitable for various industries.
The high coherence of the mechanized processing piece/product is outstanding, and the product quality is even more safe.
Our single-acting hydraulic punches, which are portable and lightweight, are extensively used in the electrical industry, construction, as well as other outdoor work areas. It has a max punching thickness of approximately 16mm, a maximum punching diameter of 24mm, as well as a maximum throat height of 110mm.
Gulf States Saw & Machine Co. offers portable double-acting hydraulic punches that provide a complete mechanized process of punching and revert through its inbuilt dexterous control device along with inching (manual mode) and automatic load recognition.
Hydraulic bench press will reduce arm fatigue and speed up fabrication. The rugged 3/8-inch plate construction allows for a variety of uses. These dies are compatible with an H-Frame machine, hydraulic punch driver, as well as a 3/4-inch or 7/16 drawbol for dimpling PortaFab machine, which is Scotchman’s entry-level Ironworker. This unit packs 45 tons of hydraulic power and is portable 110 volt. It allows for the alignment of punches to punch thin sheet metal. This punch can also be used to punch spring steel for mounting race in order to punch angle iron. You can punch a hole within 9/16 inches of the web. The rotary-style punch can punch holes within 9/16 inches of the web. It also has enough power to punch hydraulic accessory ports on Edwards ironworkers. The punching time. It has a 4.5 second punching time, a jog down punch to ensure alignment and a power retractable punch. You can choose from 115 volt or a US...
You can adjust the tools quickly and it saves you a lot of time.
Remove a piece of aluminum foil. To sharpen the blades of a three-hole punch, make sure the foil is long enough to cover all three holes. Pull off enough to sharpen all of the punches at once for one-hole and decorative punches.
Punches are divided into two categories: hollow and solid. Hollow punches are used to create a hole by puncturing a surface such as sheet metal or leather. The "exit hole" near the working end of a hollow punch makes it easy to identify.
A punch is a tool used to make an indent or a hole in a hard surface. They are typically made of a hard metal rod with a narrow tip on one end and a broad flat "butt" on the other.