Our portable double-acting hydraulic punches have a diameter of 27mm, a maximum thickness in steel of 13mm, and a throat depth of 60mm.
The excellent coherence among mechanized workpiece/products is impressive, and the product's safety is enhanced.
They are powered using hydraulic/air.
GSS Machinery has a vast selection of machines that can be used for your specific operations. We are able to sell our machines in different countries. Our reception is excellent. Your location doesn't really matter when it is time for delivery. Our clients are testament to the strength and endurance of our machines.
Capable of drilling smooth and top-level precise holes in 16.5 seconds. It comes with complete accessories to meet distinct requirements.
This drill is capable of drilling precise, smooth holes with top-level precision in only 16.5 seconds. The kit includes everything you need.
The single-acting, portable hydraulic punches can be used extensively in construction, the electricity industry, and other outdoor fields. The maximum punching thickness is approximately 16mm. It can also punch 24mm diameter and 110mm throat depth.
Gulf States Saw & Machine Co. provides portable hydraulic punches with double-acting hydraulic action that can punch and revert in a fully mechanized manner. It also offers inching (manual mode), and automatic load recognition.
Our range of this machine can swiftly punch various special-shaped holes like round and oblong holes. It also features a backup switch that stops the punch immediately at any time. This single-acting hydraulic has a compact design powered by a hydraulic pump but has manual and electric hydraulic pump options( you can select any one based on your industry needs).
GSS Machinery can make your punching machines fit your needs. Additionally, we offer additional accessories that allow you to punch in vertical and horizontal positions as well as punching with your hands. This will increase your punching power.
The hydraulic pressure of 10 tons allows it to perform a wide range of tasks. This press can accept any Mittler Punch & Flare tool or can be used in a hydraulic punch drive. These knockout punches are a cost-effective way to punch holes to make it easier for fabricators to do their jobs. Swag Offroad punches are also available...
GSS Mchinery offers a range of double-acting hydraulic punches that can be used to quickly produce holes in various materials, such as angle, channel, beam flanges, bars stock, plates, and channels.
This portable hydraulic punching unit, which weighs in at just 31 pounds, punches in a matter of seconds and is lightweight at only 31 pounds. The dual-action stripper holds and removes material as you punch. It can punch bus bars, tower iron and railings with a maximum tensile force of 65,000 psi. Mount it on your bench or transport it to the jobsite. In 24 hours, rectangular, square and hex tools will be available.
Remove a piece of aluminum foil. To sharpen the blades of a three-hole punch, make sure the foil is long enough to cover all three holes. Pull off enough to sharpen all of the punches at once for one-hole and decorative punches.
A punch press has two cooperating components: the punch, which is attached to the machine's reciprocating ram, and the die, which is clamped onto a bed or anvil with a flat surface perpendicular to the ram's path. When in use, the punch pushes against the workpiece held in the die.
CNC punching
These machines are typically outfitted with a linear die carrier (tool carrier) and quick change tools. Today, the method is used in situations where laser applications are inefficient or technically impractical. CNC stands for Computer Numerically Controlled.