How To Become A Sidemount Technical Scuba Diver King

Facebook

Due to the issues with single-orifice doubles or backmounted independents (which are not as common in modern diving), backmounted doubles were invented. Independents are two independent cylinders attached to one's back, with independent regulators for each. One cylinder was sufficient to take care of a failed 1st Stage. Single orifice duplicates were two cylinders linked with a valve and one regulator. A single orifice doubles set would cause all gas to be lost if a first stage fails. These problems can be eliminated with the modern isolated manifolds. Each cylinder can work independently but divers can also inhale gas from both of them through one regulator. These doubles are typically held together with metal bands. The valves can also be linked with an isolation device, which allows them to be seperated if required. Backmounted doubles diving offers a profile that's vertically identical to regular single-cylinder backmount.

In addition, your Sidemount rig includes tank bands, clips, and probably some more bungees to stow away your regs nicely. The clips will be connected to your harness and again, their position is important for the position of your tanks.

How To Become A Sidemount Technical Scuba Diver King

You can do eLearning and coursework at home to help support local dive shops. Then, travel to complete your training dives. For a referral, contact your local PADI Dive Center.

Sidemount can be a boon for all divers, but it's especially useful for cave diving. (It was actually cave divers that invented sidemount. These are some of the benefits:

Diving Snorkeling

Interested in becoming a Sidemount diver? You have come to the right place as this post is all about the nitty-gritty of what is involved!

Academics – The academic portions of a technical course are very similar to any other scuba class. Students will do some self study and bring the new knowledge to a discussion with their instructor. The dive planning aspects for a technical course are significantly extended from what most individuals are used to but a vital part of executing a successful dive. In overhead and decompression diving, the gas management portions of the planning discussion will take longer than most divers are used to. They even utilize a computer program to calculate their gas volumes and reserves required for the dive.

Diving Snorkeling

How long can you stay underwater with oxygen

At first, technical diving was not something that interested me. I can clearly recall chuckling to my self at the Tec divers I observed, and wondering why anyone would want to have more equipment under water. I love the feeling of freedom and closeness to nature that can envelope you in "the quiet world". Tom was a respected teacher who I felt it was important to share my experience in Tec courses with.

The Sidemount dive setup is slightly different from the backmount, as is the equipment.

How To Become A Sidemount Technical Scuba Diver Book Pdf
How To Become A Sidemount Technical Scuba Diver Book Pdf

The next day was technical sidemount. This means that we added our deco 50 and 100 percent oxygen tanks on either side. This can increase your profile underwater. It is important that you keep your tanks as small as possible. The clips can be found on each side. As your tanks become buoyant, you will adjust your tank position to fit the second clip. Here, the goal is to be as efficient as possible. Each few minutes, you switch your breathing between the tanks. By doing this, the pressure in each of the tanks will decrease at roughly the exact same rate. In the event that a tank or regulator fails you will still be able to breathe. It is important to gain experience with any new thing. I spent the next few nights doing deco dives with the sidemount rig. I was buddied with Evolution coowner David Joyce who is a very experienced Tec diver as well as a Trimix instructor. One dive saw us visit the Japanese Mogami Japanese Mogami sank at 164 feet. It was here that I was seduced by old gas masks and uniforms as well as a few bones.

All Tec diving lessons, open circuit and closed circuit rebreather, as well as technical scuba dive classes, are held at Scotty’s dive center headquarters facility in Mactan. If you aren't a Shangrila hotel guest, you can still walk in or we can pick up you at your hotel.

Can you drink alcohol after scuba diving

Do not worry about how it all will come together. A large part of the course teaches you how to set up Sidemount equipment and how to adjust bungees to ensure your tanks are in good shape. Your instructor will be there to help you through it all!

Mentality - Technical diving still has its fun side. It's about seeing cool stuff, just as sport diving. But technical divers see things longer, deeper and more hidden than the sport diver. Although technical divers are still fun-focused, they are also regularly focused. There are still jokes to be made and laughs can be had. But, diving planning and execution must be done with a sense of seriousness. Divers are exposed to risks.

Check our other pages :

Frequently Asked Questions

2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).

5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.

According to experts, approximately 40% of technical divers enroll in additional education and training programs. This yields a reasonable estimate of approximately 160,000 active technical divers worldwide.