How To Become A Sidemount Technical Scuba Diver Kit

How To Become A Technical Diver

If you want some diving classes alternative and lessons or want to know what's best next for your education, take a look at the three options below.

Technical diving is defined by being exposed at the ceiling, which prohibits the diver from reaching the surface at any time during the dive. This can be due either to a literal ceiling (a cave, wreck, or virtual ceiling) or a decompression obligation. In such cases, mandatory decompression stops are required on ascent for anyone who exceeds the NDL. This may require the use of special equipment (e.g. Twinsets, Sidemount, special gas mixtures, and more training are needed to perform those stops as well as other tasks on ascent. This will optimize Nitrogen offgassing.

To dive, you must have a minimum of fitness and good health. Before diving, you may need to be cleared by a doctor if your health is not in good condition.

If you (or your physician) have questions about medical fitness to dive, contact the experts at Sidemount PCB.

Water Diver

The Sidemount diving setup differs from that used for backmount diving.

Sidemount rigs were initially designed for cave diving. It allows divers to pass through small cracks and restrictions (tiny hole) much more easily than the traditional back mount rig.

Water Diver
How long is rebreather training

How long is rebreather training

2nd stage regulator and exposure suit with side pocket, BCD sidemount. SMB. Cutting tool. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulation. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulatory. 2nd stage regulator. 2nd Stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd stage regulator. 2nd hose

Depending on the environment and type of diving each configuration has its advantage and disadvantage. Diving in caves or wrecks the preferred way to dive for sure is either Sidemount or rebreathers. There is also an option for a Sidemount rebreather which makes the diver more streamlined to fit through narrow restrictions. Sidemount also gives the diver the advantage to leave tanks behind that will be picked up upon exiting the cave or wreck. To fit through narrow bedding planes unclipping the tanks makes the profile of the diver even smaller and places that are not available to a backmounted twinset diver become accessible.

Cave

One of most significant changes to the equipment cave divers use since the beginning is the shift from using backmounted doubles towards sidemount. While a large number of cave divers are now sidemounting, it is possible that there are many more sidemount cave diver than backmount.

Sidemount diving has many advantages. You have two tanks with one regulator, a first stage, and SPG. It makes it safer and allows for little air-hogs such as myself to get more air. Sidemount is also very comfortable, as you can quickly put tanks on the water surface and there's no pressure on your back.

How To Become A Sidemount Technical Scuba Diver Kit
What do Navy SEALs use to breathe underwater

Sidemount Diver Specialty courses may count towards Advanced Open Water Diver certification. Ask your instructor.

Technical diving can be defined as being exposed to a ceiling that prevents a diver from ascending to the surface during a dive. This could be caused by a ceiling (in terms of a cave, a wreck, etc.) or a virtual ceiling that is created by a decompression duty. To avoid decompression sickness, it is necessary to perform mandatory decompression stops on ascent if you exceed the NDL. This requires special equipment such as a Twinset or Sidemount. Special equipment such as Twinsets and Sidemounts, gas mixtures with special properties, and additional training are required to be able perform the stops on ascent accurately to maximize Nitrogen off-gassing.

How To Become A Sidemount Technical Scuba Diver 200

2nd stage regulator; exposure suit with side pockets, BCD-sidemount, SMB cutting tool, diving spool. Jet fins. Mask and spare mask. Technical diving equipments. 1 long hose (2.10m-7ft), hogarthian, or cave harness.

Gear - While all gear is identical, divers in their introductory tech classes (Intro To Tech, Sidemount and CCR Air diluent), will notice some fundamental differences in their configurations. Instead of being split into 2 stages on a single cylinder, the second stages are divided up between two with a separate stage on each. Gas planning becomes more complex and the harnesses are more chrome.

Check our other pages :

Frequently Asked Questions

Technical diving (also known as tec diving or tech diving) is non-professional scuba diving that exceeds the agency-specified limits of recreational diving.