You will also learn how to use Sidemount regulators. Usually, you will have one regulator on a long hose as well as one regulator on a short hose with a necklace. Unlike your normal regs, Sidemount regs are also marked so you can easily distinguish which tank you are breathing from. During my training, this included a swivel joint for my short hose regulator. In addition, you will have 2 SPGs – one for each first stage.
If you're not ready to try diving locally, but want to support your local dive shop, you can complete eLearning and coursework near home, then complete your training dives while traveling. Contact your local PADI Dive Center to ask about a referral.
Sidemount PCB offers assistance to those who have questions about their medical ability to dive.
Computer-aided instruction is an integral aspect of almost all courses we teach. The Why? The simple answer is that eLearning allows students to get in the water faster and spend more time there. This is why we include any applicable eLearning program -- typically a $140 value -- in all our courses at no extra cost. This is equivalent to an additional day's in-water training. This is what it's worth. Priceless.
Sidemount BCDs are a harness that has a bladder and an intricate system of sliding D rings, bungee cables, and clips. They are important for the tank position and trimming later in the water. Your instructor will likely spend quite some time making sure they fit perfectly.
The Sidemount setup for diving is slightly different to the backmount setup, and the equipment is also slightly different.
Since the beginning of the century, one of the most significant changes in the equipment cave divers use has been the shift from backmounted doubles to sidemount. Not only do a substantial number of cave divers now sidemount, it’s possible that there are more open-circuit sidemount cave divers than backmount cave divers.
Sidemount diving is a form of sidemount diving that originated in cave diving but has been incorporated into recreational and non-overhead diving over the years. Simply put, your tanks will be worn on your side instead of being attached to your back. The tanks attach to a Sidemount BCD with clips or bungee chords, allowing for maximum flexibility. It was this flexibility that cave divers used to be able to lift their tanks from the bottom underwater, making it easier to pass through tight spaces.
Sidemount diving requires only an Open Water Diver to begin. Although it's important to have excellent buoyancy and trim, you should also be able handle your equipment independently. Sidemount diving offers a whole new level of skill and equipment setup.
Technical diving can still be fun but is not recommended for anyone who wants to go deeper. Cave and decompression diving are more dangerous. You can reduce this risk by training and planning well in advance. Divers who do these dives are expected to be of a higher standard. Technical diving requires practice. You can't learn enough by reading and researching. Divers will find that the minimum standards for diving are often exceeded during training and technical instructors may do this. Technical training teaches divers redundancy. Problems can be solved from 1500ft within a cave. Then, an exit to the surface is possible. This is a crucial aspect of diving in this environment. It sounds complicated and scary. Technical training is both challenging and fun. It also gives divers the opportunity to explore parts of the globe that are not accessible to them.
There are several more agencies that provide technical diver training which are more region specific. In general the recommendation is to find a reputable instructor, look for recommendations from trusted sources and choose your instructor accordingly. Trust and comfort during the course are invaluable and will help you to feel confident and comfortable to push your boundaries and gain the knowledge you need to go beyond your current certification level.
One of the big risks for a technical diver is decompression sickness. It occurs when nitrogen gas cannot exit the body thru respiration on ascent as the ambient pressure decreases. Therefore stops have to be executed on ascent in order to avoid a pressure difference too big so nitrogen bubbles can be formed. Buoyancy control is very important to control the stops on ascent and increase efficiency for off-gassing of nitrogen. Another important skill is proper breathing which makes metabolism efficient. Trim, which we call a proper tech diving position such as horizontal with a slight arch in the back, looking forward and knees at a 90 degree angle with fins pointing back. Trim prevents stirring up sediments on the bottom as well as most efficient movement in the water. And of course proper finning techniques to avoid overexertion are mandatory to make a diver achieve maximum performance. Now you might say, we want to have fun when we go diving and not be a machine.
While technical diving is still for fun they aren’t for people wanting to go deeper, just because. There is a higher risk associated with cave and decompression diving. This risk is mitigated, in part, by thorough dive planning and training. As such, divers doing these dives are held towards a higher standard. It will take practice to become a technical diver. No amount of research and reading can supplement that in water time. Divers will notice that the minimum standards are often exceeded during training courses and individual technical instructors often do this. Technical training teaches a diver redundancy so that problems can be successfully solved 1500ft inside a flooded cave and an exit to the surface can be executed. While that sounds complex and scary it’s a necessary aspect of diving in that environment. Technical training is not only challenging but it’s fun and at the end of it the diver has a golden ticket to see parts of the world that are totally closed off to other people.
PADI Training app for Android(tm), Apple (r) iOS devices. Three models should be used with the most recent OS (operating-system) to ensure an excellent experience.
Technical diving (also known as tec diving or tech diving) is non-professional scuba diving that exceeds the agency-specified limits of recreational diving.