Take a look at these three options if diving classes and lessons are not what you desire or you need to decide where to go next.
While technical diving is still for fun they aren’t for people wanting to go deeper, just because. There is a higher risk associated with cave and decompression diving. This risk is mitigated, in part, by thorough dive planning and training. As such, divers doing these dives are held towards a higher standard. It will take practice to become a technical diver. No amount of research and reading can supplement that in water time. Divers will notice that the minimum standards are often exceeded during training courses and individual technical instructors often do this. Technical training teaches a diver redundancy so that problems can be successfully solved 1500ft inside a flooded cave and an exit to the surface can be executed. While that sounds complex and scary it’s a necessary aspect of diving in that environment. Technical training is not only challenging but it’s fun and at the end of it the diver has a golden ticket to see parts of the world that are totally closed off to other people.
Gear - While all gear is identical, divers in their introductory tech classes (Intro To Tech, Sidemount and CCR Air diluent), will notice some fundamental differences in their configurations. Instead of being split into 2 stages on a single cylinder, the second stages are divided up between two with a separate stage on each. Gas planning becomes more complex and the harnesses are more chrome.
Cookies are used to provide the best possible user experience. Cookies are stored in your browser. They perform functions like recognising when you return to our site and helping our team understand which sections you find most useful and interesting.
JavaScript is used in our contact form. It means that in order to fill our contact form, you must activate JavaScript or temporarily deactivate any add-blocker(we don't have adds).
Cave passages formed over millions years of water erosion and extending thousands of feet from their entrance are reserved only for overhead divers. They are stunning in their beauty and peacefulness, but only because they were formed so long ago.
How To Become A Sidemount Technical Scuba Diver Diver2 first stage regulator, 2 second stage regulator, exposure suit with side pockets, BCD sidemount, SMB, cutting tool, diving spool, Jet fins, mask and another spare mask, technical diving equipments, 1 long hose (2.10m - 7ft), hogarthian or cave harness.
Being a technical diver requires a lot of training, experience, and passion. The added risks of technical diving are not worth the risk if any one of these is missing.
Sidemount diving has many advantages. You have two tanks with one regulator, a first stage, and SPG. It makes it safer and allows for little air-hogs such as myself to get more air. Sidemount is also very comfortable, as you can quickly put tanks on the water surface and there's no pressure on your back.
Sidemount regulators will also be covered. You will usually have one regulator for a long hose and one for a shorter hose with a necklace. Sidemount regs are marked, so that you can identify which tank you are using. This included a swivel joint to allow me to regulate my short hose. You will also receive 2 SPGs, one for each stage.
You can choose between recreational Sidemount or technical Sidemount with most agencies. Although the prerequisites are the same for TDI and SDI, the tec sidemount course will give you more skills. This course will require you to be more skilled in mastering the skills. You must maintain a perfect trim and keep your body level throughout.
With most agencies you can choose between recreational Sidemount and technical Sidemount. The prerequisites for example with SDI and TDI are the same but the tec Sidemount course will add more skills. It will also ask more of you in terms of mastering them – perfect trim and keeping still and leveled during your skills is a must!
Sidemount divers typically use two tanks, but you can use just one tank (I was taught it's called "monkey") or more than two tanks to do deco dives.
My first pool sessions were difficult. I felt like an open-water diver once more, strapped into twin tanks and trying valve drills. The Tec 40 and 45 courses were difficult at first, but I soon found that new skills became natural and I enjoyed the course. The joy of Tec diving lies in taking your diving skills, buoyancy, and awareness to the next level. The feeling of knowing that you are capable of handling life-threatening situations at depth and without needing to descend to the surface (dues to decompression requirements) can be quite satisfying. It's satisfying to execute your dive plans with military precision.
5-6 days
Rebreather training classes are typically 5-6 days long, but can be longer depending on a variety of factors such as the training agency, your local conditions, your instructor, and your ability to meet the class standards.
- Increased Bottom Time A Closed Circuit diver is not concerned with running out of gas because they are only limited by decompression. This can also be reduced by selecting an oxygen partial pressure that provides the diver with virtually limitless bottom times in 60 feet or less of water.
The depth range of oxygen rebreathers (simple closed circuit) is limited to approximately 6 m, beyond which the risk of acute oxygen toxicity rises to unacceptable levels very quickly.