You will need your standard wetsuit, fins and mask as well as a computer, compass and DSMB.
The next day was technical sidemount. This means that we added our deco 50 and 100 percent oxygen tanks on either side. This can increase your profile underwater. It is important that you keep your tanks as small as possible. The clips can be found on each side. As your tanks become buoyant, you will adjust your tank position to fit the second clip. Here, the goal is to be as efficient as possible. Each few minutes, you switch your breathing between the tanks. By doing this, the pressure in each of the tanks will decrease at roughly the exact same rate. In the event that a tank or regulator fails you will still be able to breathe. It is important to gain experience with any new thing. I spent the next few nights doing deco dives with the sidemount rig. I was buddied with Evolution coowner David Joyce who is a very experienced Tec diver as well as a Trimix instructor. One dive saw us visit the Japanese Mogami Japanese Mogami sank at 164 feet. It was here that I was seduced by old gas masks and uniforms as well as a few bones.
The Sidemount Diver Specialty course dive may count toward your Advanced Open Water Diver certification – ask your instructor about earning credit.
It takes passion, experience, and training to become a technical dive instructor. Technical diving comes with additional risks, so it's not worth taking on if you don't have the right combination.
An Open Water Diver is all you need to get started in Sidemount diving. It is important to have good buoyancy, trim, and be able set up your equipment and manage it yourself. Sidemount diving can bring a new dimension to your equipment setup and skills.
It is becoming more popular to do technical diving and we were immediately drawn to it at Girls that ScubaHQ! We had many questions and nerves, so we went to Theresia Gollner, who is working at Blue Marlin Gili T in Lombok. We were given an introduction to twin sets by her and then she let us in on the amazing world of technical diving. Here are the lessons she gave us:
To get started on Sidemount diving you don’t need more than an Open Water Diver. Mind you, it obviously helps to have good buoyancy and trim and you should be able to set up and handle your equipment comfortably by yourself. Sidemount diving will add a whole new dimension when it comes to equipment setup and skills.
The shift from backmounted doubles into sidemount has been one of the biggest changes in the equipment that cave divers have used since the turn of the century. A large number of cave divers sidemount. Additionally, there may be more sidemount cave divers than open-circuit backmount cave divers.
Technical divers search for wrecks and reefs in depths below the recreational limit (40 m/130 ft). These divers have the ability to dive into underwater caves and other areas not accessible by regular recreational diving.
The sidemount rig was initially created for cave diving. This allows the diver through small cracks (tiny holes) more quickly than the back mount rig.
I took my first sidemount and technical sidesmount courses. Sidemount diving, like the name implies, requires you to place your tank on your hands. My hands and knuckles were completely covered by cuts at the end. The idea behind sidemount diving is to unclip your tanks and then place them in front you, Superman style. This will streamline your workflow. After making some adjustments to my harness size, the afternoon dive went more smoothly. I was now comfortable unclipping my harness and "Superman-ing” with the tanks. Sidemount gives you an amazing level of freedom, even if you have doubles on your back. Matt put up obstacle courses. We were soon flying through them with tanks in front, barrel-rolling, swimming upside down and tanks at the rear.
Your Sidemount rig also includes clips and tank bands. These clips will attach to your harness. Again, their location is crucial for the positioning of your tanks.
Sidemount also has clips and tanks bands. The clips will be attached to your harness. Once again, their positions are important for the location of your tanks.
There are many great readings about technical diving. Some are stories of personal experiences and adventures in technical diving that are definitely worth reading. Some of the greatest books for sure are:
from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.
To begin a technical diving course, you must have completed the following prerequisites: a PADI Advanced Open Water Diver certificate or equivalent, a PADI Enriched Air Diver certificate or equivalent, and a PADI Deep Diver certificate or proof of at least 10 dives to 30 metres/100 feet.
To register for the PADI Advanced Rebreather Diver course, you must first: You must be a PADI Open Water Diver, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.