Scuba Sidemount Setup

How many dives do you need for cave diving

Specific skills - The tech programs teach specific dive skills that are required for each category of diving. Navigation and line skills for overhead diving are practiced until they become automatic. Without blinking an eye, decompression divers are able to plan and execute gas management stops and stops. To ensure the equipment's perfect functionality, rebreather divers carefully build, test, and disassemble their equipment. Each course is covered in the initial level of certification. From there, you can move up to the next level. Each level of certification takes these skills deeper and makes them more challenging. This helps divers become well-rounded, knowledgeable and well-prepared.

At first, technical diving was not something that interested me. I can clearly recall chuckling to my self at the Tec divers I observed, and wondering why anyone would want to have more equipment under water. I love the feeling of freedom and closeness to nature that can envelope you in "the quiet world". Tom was a respected teacher who I felt it was important to share my experience in Tec courses with.

The following options are available for those looking for diving classes alternatives and lessons, as well as information on the best next steps in their education.

Initially I had no interest in technical diving. I distinctly remember chuckling to myself at the Tec divers I saw, wondering why anyone would want to carry more equipment underwater. I love the sense of freedom and proximity to nature that can envelop you in “the silent world.” However, Tom had a reputation as an inspirational teacher, and as I was working in a dive shop with Tec courses it seemed rude not to at least try.

Big Blue Tech

One of the big risks for a technical diver is decompression sickness. It occurs when nitrogen gas cannot exit the body thru respiration on ascent as the ambient pressure decreases. Therefore stops have to be executed on ascent in order to avoid a pressure difference too big so nitrogen bubbles can be formed. Buoyancy control is very important to control the stops on ascent and increase efficiency for off-gassing of nitrogen. Another important skill is proper breathing which makes metabolism efficient. Trim, which we call a proper tech diving position such as horizontal with a slight arch in the back, looking forward and knees at a 90 degree angle with fins pointing back. Trim prevents stirring up sediments on the bottom as well as most efficient movement in the water. And of course proper finning techniques to avoid overexertion are mandatory to make a diver achieve maximum performance. Now you might say, we want to have fun when we go diving and not be a machine.

Your Sidemount BCD is a harness equipped with a bladder. It also has a system of sliding Drings, bungee chords, clips, and other intricate features. The fit and position of your tank are critical for how your tank looks and is trimmed later in the water. Your instructor might spend quite a while to make sure you have them exactly right.

Scuba Sidemount Setup
Big Blue Tech
What do you need for technical diving

What do you need for technical diving

Sidemount Diver Specialty may count towards your Advanced Open Water Diver certification. Ask your instructor for details.

Interested in becoming a Sidemount diver? You have come to the right place as this post is all about the nitty-gritty of what is involved!

Facebook

I just arrived on Malapascua Island, Philippines. I will be working my way up to become a Tec diving instructor over the next two-months. Since the past two years, I have been a recreational instructor in Bali. Now I want to increase my professional diving experience. Sidemount PCB was where I got my first taste of technical diving. Tom West, Tec instructor-trainer and course director at PADI, made me a Tec-50 diver.

The technical sidemount was completed the next day. This involved adding our 50-percent oxygen tank and 100 percent oxygen tanks to either side. This will increase your profile underwater. You must ensure that the tanks are as slim as possible. A couple of clips are located on either side of your waist. When your tanks become positively buoyant and you inhale, adjust the clip to match your tank position. It is important to keep your breathing as smooth as possible. Your breathing will change from one tank to another every few minutes. The pressure in each tank will drop at approximately the same rate. If a regulator or tank fails, you will still have gas to breath. Comfort and enjoyment can only be achieved by gaining experience. I spent the next few day doing deco dives using the sidemount rig with Evolution co-owner David Joyce, a Trimix instructor and Tec diver. We visited the Japanese Mogami wreck at 164ft, where I was charmed by the pieces of old gas masks and uniforms.

How To Become A Sidemount Technical Scuba Diver Company
How To Become A Sidemount Technical Scuba Diver Company

Sidemount diving is a great way to get additional air. There are two tanks that you use, one tank with an SPG and the other with regulators. This makes it safer and gives air-hogs like me a lot more air. Sidemount also makes diving extremely easy, since you can simply put tanks on top and there isn't any pressure on your spine.

One of the most significant innovations in equipment cave divers have seen since the beginning of this century has been the transition from backmounted to sidemount doubles. Many cave divers now sidemount. There may even be more open-circuit sidemount cave divers that backmount cave divers.

Logged Dives

New gear means new techniques. Sidemount diving, even if it's simple, requires some new skills (easily learned).

1. Your personal informations (name, email, etc). 2. Select the date you prefer. 3. Just click on Submit to ask a question or inquire.

Check our other pages :

Frequently Asked Questions

from 170 to 350 feet
While conventional scuba diving has a recommended maximum depth of 130 feet, technical divers may work at depths ranging from 170 feet to 350 feet, and sometimes even deeper.

To begin a technical diving course, you must have completed the following prerequisites: a PADI Advanced Open Water Diver certificate or equivalent, a PADI Enriched Air Diver certificate or equivalent, and a PADI Deep Diver certificate or proof of at least 10 dives to 30 metres/100 feet.
 

To register for the PADI Advanced Rebreather Diver course, you must first: You must be a PADI Open Water Diver, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.