JavaScript is used to create our contact form. This means that you will be able fill out our contact form. To activate JavaScript in the browser or temporarily deactivate your add-blocker from our website (we don't have adds).
Our CDS Basics Orientation course is the best option if you don't plan to use sidemount while you cave diver training.
Take a look at these three options if diving classes and lessons are not what you desire or you need to decide where to go next.
While technical diving is still for fun they aren’t for people wanting to go deeper, just because. There is a higher risk associated with cave and decompression diving. This risk is mitigated, in part, by thorough dive planning and training. As such, divers doing these dives are held towards a higher standard. It will take practice to become a technical diver. No amount of research and reading can supplement that in water time. Divers will notice that the minimum standards are often exceeded during training courses and individual technical instructors often do this. Technical training teaches a diver redundancy so that problems can be successfully solved 1500ft inside a flooded cave and an exit to the surface can be executed. While that sounds complex and scary it’s a necessary aspect of diving in that environment. Technical training is not only challenging but it’s fun and at the end of it the diver has a golden ticket to see parts of the world that are totally closed off to other people.
Technical diving is great fun, but it isn't recommended for anyone looking to dive deeper. Cave and deep diving pose a higher risk. It is possible to mitigate this risk through careful dive planning and training. Divemasters performing these dives will be held to a high standard. It will take practice and hard work to become a technical diver. The only way to improve your water time is through research and reading. Divers will often notice that the minimum standards of diving are often exceeded in training courses. Technical instructors can often exceed these minimum standards. Technical training helps to teach diver redundancy. While it may sound scary and difficult, it is necessary to dive in such an environment. Technical training is fun, challenging and gives you the chance to see places in the world that are closed to others.
International Training, which is the parent organization for Technical Diving International / Scuba Diving International, offers both the SDI version and TDI versions their Sidemount Diver course. Both courses can be used in the same way. Both courses use the exact same learning materials (which, obviously, we wrote). What's the difference then?
JavaScript is used in our contact form. It means that in order to fill our contact form, you must activate JavaScript or temporarily deactivate any add-blocker(we don't have adds).
Cave passages formed over millions years of water erosion and extending thousands of feet from their entrance are reserved only for overhead divers. They are stunning in their beauty and peacefulness, but only because they were formed so long ago.
1. Your personal informations (name, email, etc). 2. Pick your prefered date. 3. You can ask question/inquire then just Submit.
Backmounted doubles were created in response to problems with single orifice and backmounted independences. Independents consist of two cylinders, each with its own regulator. The diver could only use one cylinder if a first stage failed. Single orifice duals consisted of two cylinders linked by a valve. One regulator was used for the first stage. The gas would not be released if the first stage failed due to a failure of one orifice doubles. Both of these problems have been eliminated by today's isolated manifold duplicates. Each cylinder is capable of being worked separately, but the diver can use one regulator to allow him or her to inhale gas directly from both cylinders. This type of doubles is usually held together using metal bands. Additionally, the valves are linked by an isolation manifold which allows the two to be separated as needed. Backmounted doubles diving looks similar to regular single cylinder backmounts, but it has a profile that is vertically identical.
You can choose between recreational Sidemount or technical Sidemount with most agencies. Although the prerequisites are the same for TDI and SDI, the tec sidemount course will give you more skills. This course will require you to be more skilled in mastering the skills. You must maintain a perfect trim and keep your body level throughout.
With most agencies you can choose between recreational Sidemount and technical Sidemount. The prerequisites for example with SDI and TDI are the same but the tec Sidemount course will add more skills. It will also ask more of you in terms of mastering them – perfect trim and keeping still and leveled during your skills is a must!
I was a bit numb after my initial pool sessions. I was strapped into the twin tanks, trying to conduct valve drills. But, the Tec 40-45 and 50 courses helped me to feel more comfortable and my skills began to improve. By the end of the course, I was enjoying myself. It's about taking your diving skills, buoyancy and awareness up to the next level. This is what Tec diving offers. This is a great feeling. Knowing you're capable in managing life-threatening emergency situations at depth without the need to ascend to the surface (dues decompression requirements), is an amazing feeling. It's very satisfying to execute your dive program with military precision.
Technical diving is fun, but not for those who want to dive deeper. Cave and decompression diving carry a greater risk. Dive planning and training are key to reducing this risk. These divers are held to a higher standard. To become a skilled diver, it will take practice. It is not possible to replace the time spent in water, no matter how much research you do. Divers will see that minimum standards are often exceeded by instructors during training courses. Technical training teaches diver redundancy. This allows problems to be solved at 1500ft in a cave, and then an exit can be made to the surface. Although it sounds scary and complicated, this is an essential aspect of diving in such an environment. Technical training is challenging, but also fun. The diver will have a golden ticket that opens up new areas of the world.
2-3 hours
Even with small cylinders, you can usually dive for 2-3 hours (rebreathers typically have two 2/3l cylinders or one 3/5l cylinder).
Have a PADI Deep Specialty Instructor certification or have completed a PADI Deep Specialty Instructor course. Have at least 100 logged dives, including at least 20 enriched air dives, 25 dives deeper than 18 meters/60 feet, and 15 dives deeper than 30 meters/100 feet. You can become a Tec 45 diver.
According to experts, approximately 40% of technical divers enroll in additional education and training programs. This yields a reasonable estimate of approximately 160,000 active technical divers worldwide.