ExactCut 430 can be used to automate the automated processing of thick and thin metals and alloys as well as brittle materials, such as sapphire and PCD.

Imagine putting a through hole centered on a tube. It should be centered according to the actual dimension and not just one side of the tube. Bowed tubes will make it more difficult. Tube fabricating is hard work.

There is no need to coordinate multiple orders or vendors. Gulf States Saw & Machinery Co., Inc. handles everything, from material procurement to past deliveries.

There is no shortage of variety in any job shop. Parts of various sizes are not uncommon when you use one tube. The machine should be able unload laser-cut pieces as small as 2in. It can also be extended up to 15 feet, one after the other. It must also be in a position to lift the parts and not damage them. This is often a problem for aluminum or other softer metals.

Tube Lasers Cutting Systems Dallas Tx

The most productive solution for tubes of any section. Tubes up to Ø 6" (152.4 mm)2D cutCO2 or fiber laser

Metal fabricators know a lot about what flat sheet processing has involved with fiber laser cutting technology. But, what does the fiber laser do for tube cutting? A lot actually.

Tube Lasers Cutting Systems Dallas Tx
Valuable Industry Resources

Valuable Industry Resources

With a laser tube-cutting machine, there are no standard towers. Bundle loads are the most efficient method for handling tubes. These loaders feed one tube per bundle into the tube cutter via a singularizing mechanism. This feeding method is not compatible with open profiles such as angles or channels. Because they interlock within a bundle, and don't allow for easy release, this type of feeding doesn't work. Step loaders are employed for open profiles. These machines sequence one section at a time and maintain the correct orientation.

TruLaser Tube 5000 fiber is an affordable laser tube cutting machine. It's easy to use and reliable, making it ideal for new users as well as those who need a second machine.

Tube Lasers Cutting Systems Denver

Cambus Medical uses Coherent StarCut Tube, a laser-powered tube cutter machine powered by lasers, and Select Laser Welders for business success.

This is a third of the full 20-foot (240") length of a tube. It makes it easy to make three stock pieces. You can still buy full length tubes without having to waste any material

Tube Laser Cutting Systems Qy
Tube Laser Cutting Systems Qy

The tube cutting laser machine StarCut Tube offers the ultimate precision, with contour cutting accuracies better than +/- 5µm.

Monaco high power femtosecond lasers provide excellent edge quality for micromachining. They also offer improvements in scientific application like three-photon microscopicscopy.

Is water jet cutting better than laser

Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.

StarCut Tube L 600 may be purchased with either a fiber, USP or both lasers. StarCut Tube SL Compact Model has the smallest footprint.

Frequently Asked Questions

Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.

CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.