Tubes and profiles can be found everywhere, in mechanical engineering and system building as well as the furniture industry. Because lasers offer new design possibilities, more and more designers are taking full advantage of the laser-cut profile and tube benefits. This is a significant increase in demand. Find out all about TruLaser Tube machines and the many solutions available in laser tube cutting.
Some things are obvious. A fiber laser has a smaller laser "generator" than a CO2-resonator. Actually, the fiber laser is made by banks of diodes which are combined in a small module. These modules can have a power range from 600 to 1,500 W. To create the final powered resonance, multiple modules are spliced together. This is usually the same size as a small filing cupboard. The fiber-optic cables channel the light and amplify it. Fiber-optic cables transmit the same light as when they were generated, with no loss of power and quality. The fiber-optic cable is then adjusted and focused to cut the appropriate material.
The weld seam is another consideration in tube cutting. This material is then roll-formed before being welded together. This brings us to two important points that should be addressed.
Fabricators may think first of high speed cutting when thinking about fiber laser technology. It might be true that speed is relative when it involves tube cutting. It's about how long it takes to cut a tube to meet the specifications, not its actual speed.
Laser systems are available for electronics manufacturing. They can perform cutting, welding marking, marking, and ablation with high precision.
Tubes, profiles and systems are everywhere. They're used for everything from mechanical engineering to system construction to furniture making. With the new possibilities that lasers present, designers are increasingly taking advantage of laser-cut tubes or profiles. This has led to a substantial increase in demand. TruLaser Tube machines are a complete solution for laser tube cutting.
Tubes and profiles are used everywhere – from mechanical engineering and system construction all the way to the furniture industry. Lasers have opened up new design possibilities, so more and more designers are taking advantage of the benefits of laser-cut tubes and profiles thereby considerably increasing demand. Discover all-round solutions for the world of laser tube cutting and find out more about the TruLaser Tube machines.
The CO2 solution to large-diameter tubes and profiles Tubes up O14" / 24", (355 mm, 610 mm).3D cutting modeCO2 laser
You can choose between 2D or 3D laser cutting technology, which allows you to create parts with a very specific shape. This includes tubes of various shapes, such as squares, rectangles, and profiles with different open cross-sections (e.g H, L and Tcross-sections). The 3D technology allows for bevel cuts of up to 45 degrees. This flexibility eliminates the need to do costly milling, drilling, punching or sawing.
The CO2 solution for large diameter tubes and profiles.Tubes up to Ø 14" / 24" (355 mm / 610 mm)3D cutting modeCO2 laser
The CO2 Resonator is more powerful and uses more energy. This is because electricity is used to mix gases to make the laser beam. Mirrors assist the light in increasing its intensity, which prepares it to exit the resonance. Once the beam has left the resonator it must travel through several cooled reflections before reaching the lens. This is what causes the laser beam to lose its power and quality.
Lasertube systems, our 2D or 3D laser cutting system for tubes, bars, profiles and tubes from 12 mm up to 610mm (.5" to 24-") in diameter and 18 m (60") in length, are called Lasertube systems.
Reduce secondary operations: A tube-laser can cut a piece to size and add holes and other cutouts in one step. It eliminates the need to perform secondary actions or manually remove material. It is possible to keep tight tolerances even on complex fabrications. Parts can be made from one continuous piece. They are easy to put together and fit perfectly. We can also tube laser carbon, stainless steel, and aluminum.
This is the tube laser cutting solution that offers the most versatility. Tubes up to O9.45" (240mm)3D Cutting modeCO2 or Fiber Laser
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.
CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.