Let's look below at the advantages of using an automatic tube and section bar storage system with a Lasertube cutting system.
We haven't talked about cutting speed, you may have noticed. You can cut up to 500 inches per hour on a tube but it's not always possible. The main focus of laser tube cutting is how long it takes to load the tube, index it so that it's in the right spot for cutting, then pierce and slice it. Laser tube cutting machines have a slower cutting speed than they do with parts.
Check out our StarCut Tube laboratory and production area to see more about these fully-automated multi-axis CNC machine for tubes and flat materials.
Medical device manufacturing is possible with precision and maximum uptime using Coherent Laser Systems for cutting, welding drilling, texturizing and marking.
Get a peek into our StarCut Tube manufacturing area and lab to learn about the multi-axis CNC machines that can be used for flat and tube production, as well as medical devices such stent shafts, hypotubes and PTCA devices.
Combined laser system for tube and sheet metal cutting.Tubes up to Ø 4.72" (120 mm)Sheets up to 236" x 79" (6000 mm x 2000 mm)Fiber Laser
A laser cutting machine that cuts sheet metal can change out a sheet in seconds. The same can be done on a laser tube cutting machine, but it’s a whole different story as to how it’s done.
StarFeed can be used as an automated loader/unloader to the StarCut Tube laser cutting machine. It comes in two sizes, S and L. The StarFeed allows you to fully automate dry and wet cutting for tubes of any diameter from 1-20mm. StarFeed L can store 48 tubes and allows processing of oval tubing. Its sensor-controlled gripping unit avoids damage. The result is a substantial increase in productivity.
Even for XXL tubing, it is built for maximum productivity. This machine has a solid-state laser that can be used in a variety of ways to produce tubes and profiles from varying materials and wall thicknesses.
The simplest way to enter the tube laser cutting world. Tubes up to Ø 4,72" (120 mm)2D cutFiber laser
Lasertube systems are our 2D and 3D laser cutting systems for tubes, bars and profiles, from 12 mm to 610 mm (.5” to 24") in diameter and up to 18 m (60') in length.
Variety is the reality of any job shop, and the same goes for those that operate a tube laser. It’s not unusual to see parts of various sizes come from one tube. The machine must be able to unload laser-cut parts that may be as small as 2 in. and as long as 15 ft., one right after the other. It also must be able to unload those parts without damaging them, which can be a challenge with softer metals such as aluminum.
Another thing to remember is that traditional methods of checking for twists and bows in the tube may take as long as five to seven seconds before cutting begins. You have to compromise accuracy for productivity with traditional touch sensing. This can be frustrating, especially in this age of fiber laser cutting. However, working with tube is much more difficult than working with sheet metal.
The application of processed tubes and profiles is manifold. Whether in the automotive industry, furniture design, architecture, petrochemical industry or commercial vehicle construction. In many industries, the laser-assisted processing of tubes and profiles offers an almost unlimited manufacturing spectrum for components and unique design possibilities.
The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.
Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.