A laser cutting machine can make a sheet of sheet metal in seconds. However, a laser tube cutting machine can achieve the same results. It is quite different from how it works.
NIT uses the Coherent laser to create vertical components of nitinol with extraordinary precision and edge strength.
Some things are quite noticeable. The laser “generator” on a fiber laser is much smaller when compared to a traditional CO2 resonator. In fact, the fiber laser is created by banks of diodes that are put together in a briefcase-size module that can range in power from 600 to 1,500 watts. Multiple modules are spliced together to create the final powered resonator, which is typically the size of a small filing cabinet. The light generated is channeled and amplified through fiber-optic cable. When the light exits the fiber-optic cable, it is the same that is was upon being generated with no loss of power or quality. It is then adjusted and focused for the type of material to be cut.
Laser system that combines sheet and tube metal cutting. Tubes upto O 4.72" (120mm).Sheets upto 236"x79" (6000mm x 2000mm)Fiber Laser
We offer you the ideal solutions for the world of laser tube cutting. Find out here how lasers can eliminate entire process steps while also increasing the range of parts you can produce.
Fiber solutions for large diameter tubes or profiles Tubes up O14 (355mm)3D-cutting modeFiber laser
This is the easiest way to enter tube laser cutting. Tubes upto O 4,72" (120mm)2D CutFiber laser
The CO2 resonator requires much more energy and is larger. Electricity is used to combine gases to create the laser beam. Mirrors aid in the light's intensity and prepare it for exiting the resonator. The beam must travel along a path that includes several cooled mirrors to reach the lens after it has exited the resonator. This causes the beam to lose power and quality.
The fiber solution to large-diameter profiles and tubes. Tubes up O14 (355.5 mm)3D Cutting ModeFiber laser
StarCut Tubes SL is a laser cutting system that provides high accuracy, superior reliability, as well as high performance for cutting complicated medical devices such stents.
The worthwhile laser tube cutting machine: the TruLaser Tube 3000 fiber is economical even when it is not being fully utilized. Thanks to its reliability and easy of operation, it is perfect for first-time users or as a supplementary machine.
Traditional tube features can take a lot of time. FabLight makes it simple to have exactly what you want, and how you design it in just minutes.
The tube laser cutting solution has the greatest working range. Tubes upto O 9.45" (240mm), 3D cutting modeCO2 OR fiber laser
In-house laser tube cutting does not have to be difficult or costly. Everybody, from engineers to students, can cut like never before
The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.
Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.