This is your easiest route to tube laser cutting. Tubes as large as O 4,72" (120mm).2D cutter laser
A tube is very flexible and does not require a high-powered laser. Laser generators with a power output of 12 kW are now possible for flat sheet cutting machines. Tube laser cutters require a power consumption of only 5 kW. To cut a tube you must always look at the opposite end of the tube. A stronger laser would simply blow through your tube while cutting. (Officially, if the laser is processing a beam and a channel on the tube's laser, there are no need to worry about any other side.
We can complete your project in one facility with no downtime and extended lead times. We offer full-service center support that can:
How can this be compensated? Traditionally, you'd touch your face with the sensor at the contact area. The tube will then be rotated and the other end of it touched. This gives the control a good idea of the tube's bend. This technique is precise and will ensure that all through-holes work for your application. The ability to deliver very tight tolerances is affected by every rotation of a tube.
Some things aren’t quite as evident until you take a closer look at a fiber laser in operation. Because its beam diameter is often one-third the size of a CO2 beam, a fiber laser has a greater power density than a CO2 laser beam. Not only does this allow the fiber to cut faster, but it also allows it to pierce faster. This smaller beam size also gives the fiber the ability to cut intricate shapes and leave sharp edges. Imagine cutting a company logo out of a tube when the spacing between the logo’s letters is 0.035 inch; a fiber can make that cut, while a CO2 laser can’t.
PowerLine C CO2 laser-based systems are used for precision drilling and cutting, scribing marking, engraving, and scribing on many non-metals such as glass, organic materials, and other non-metals.
With Lasertube systems, you can create new applications or improve existing ones, entering new industrial sectors and increasing profit margins.
Imagine having to place a through-hole centered on a tube. It has to be centered to the actual dimension, not just one face of the tube. If the tube is bowed, that’s going to make things more difficult. That’s the life of tube fabricating.
When it comes to processing tubes, pipes, and structural steel, Gulf States Saw & Machinery Co., Inc. has a solution to fit a range of fabrication needs. Not only do Gulf States Saw & Machinery Co., Inc. tube lasers offer superior laser-cutting technology, many also integrate additional processing functions to deliver value-added benefits for fabricators.
Laser tube cutting machines do not have standard material towers. Bundle loaders provide the fastest method of handling tube material. One tube is fed from a bundle into the tube laser by a singularizing system. This type isn't able to feed open profiles like angles and channels. They interlock in the bundle and are not easy to get free. Step loaders can be used to sequence open profiles one by one into the machine, while still maintaining the proper orientation.
Micrometric Ltd uses a versatile Coherent StarCuttube laser cutting machine for speed and precision in manufacturing aerospace and medical products.
Tube cutting also requires a weld seam. This material is rolled-formed and then welded together. These two points should be considered:
Many of Gulf States Saw & Machinery Co., Inc.’s tube laser-cutting system integrate intelligent functions such as monitoring, setting up, and cutting. These automated functions increase machine efficiency and ease-of-use. The wide range of capabilities offered by Gulf States Saw & Machinery Co., Inc.’s tube and pipeline lasers make these machines suitable for many industries and a variety if applications.
The SL has a rock-solid platform for cutting (the SL uses a base made of mineral casts). These machines provide the highest precision with contour cutting accuracy better than +/-5 um. The latest Monaco USP laser, or the fiber laser, allows for precise cutting of any type of metal or polymer.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.
CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.