How long do CO2 laser tubes last

Tube Lasers Cutting Systems Limited

Our system solutions allow for flexible production of small or large series with diameters from 10 to 324 millimeters, and pipe and profile lengths as high as 12.5 meters.

The subject of material loading and unloading automation is well established in sheet laser cutting with a multitude of solutions and complexity. In contrast, tube laser cutting systems equipped with vertical storage systems, for tubes and section bars, capable of handling bars automatically and allowing for unmanned production changes have only been available for a few years.

The TruLaser Tube 5000 fiber attains record speeds. It maximizes the potential of solid-state lasers. This allows users to have fast processing times and access to many possible parts.

Imagine having to place a through-hole centered on a tube. It has to be centered to the actual dimension, not just one face of the tube. If the tube is bowed, that’s going to make things more difficult. That’s the life of tube fabricating.

Tooling

Tooling

A few machinery manufacturers now use cameras to verify tubes. The cameras reduce the quality inspection to less than a second, as well as the number of required rotations. This allows the machine both to remain productive and accurate.

Imagine that you need to put a through-hole at the center of a tube. It must be centered to the actual dimensions, not just one. This will make things more complicated. This is how tube manufacturing works.

How do tube cutters work

The CO2 resonator is much larger and requires more energy, as electricity is introduced to a combination of gases to produce the laser beam. Mirrors help the light gain in intensity, preparing it to exit the resonator. After exiting the resonator, the beam must travel through a path comprising several cooled mirrors until it reaches the lens. This travel causes a loss of power and quality in the laser beam.

Discover laser systems for electronics manufacturing that perform fast, high-precision cutting, welding, marking, and ablation of metals and plastics.

How do tube cutters work

Tube Laser Cutting Systems Xt

How can this be compensated? Traditionally, you'd touch your face with the sensor at the contact area. The tube will then be rotated and the other end of it touched. This gives the control a good idea of the tube's bend. This technique is precise and will ensure that all through-holes work for your application. The ability to deliver very tight tolerances is affected by every rotation of a tube.

A tube extension is available to load tube stock upto 80", or 6’8". It is important to note that the maximum part sizes remain at 52".

Tube Lasers Cutting Systems Limited
Tube

Find out how the Coherent StarCut Tube (and StarFiber laser powered cutting machines) helped NPX Medical get a competitive edge in stent manufacturing.

A tube is very flexible and does not require a high-powered laser. Laser generators with a power output of 12 kW are now possible for flat sheet cutting machines. Tube laser cutters require a power consumption of only 5 kW. To cut a tube you must always look at the opposite end of the tube. A stronger laser would simply blow through your tube while cutting. (Officially, if the laser is processing a beam and a channel on the tube's laser, there are no need to worry about any other side.

How do tube cutters work

Check our other pages :

Tube Laser Cutting Systems Job Work In Ludhiana

Lasertube systems can be used to develop new applications and improve existing ones. This allows you to enter new industrial sectors, increasing profits, and allowing for new opportunities.

Discover how Cambus Medical uses the Coherent StarCut Tube laser-powered tube cutting machine and Select Laser Welders to create business success.