How much is laser cutting per hour
Some things are extremely obvious. The size of the laser "generator," on a fiber laser, is much smaller than that of a traditional CO2 resonanceator. The fiber laser is made up of banks of diodes. Each module can hold 600 to 1,500W. Multiple modules can be spliced together in order to create the final powered-resonator. This module is typically about the same size and shape as a small filing box. Fiber-optic cable channels the light generated and amplifies it. The light is still the same quality and power when it exits the fibre-optic conduit. It is then adjusted for the type and focus of the material to be cut.
With a laser tube-cutting machine, there are no standard towers. Bundle loads are the most efficient method for handling tubes. These loaders feed one tube per bundle into the tube cutter via a singularizing mechanism. This feeding method is not compatible with open profiles such as angles or channels. Because they interlock within a bundle, and don't allow for easy release, this type of feeding doesn't work. Step loaders are employed for open profiles. These machines sequence one section at a time and maintain the correct orientation.