Triumph Laser's 30W desktop laser engraver is equipped with EZCAD2.0, a laser control program. EZCAD2.0 lets you create simple shapes and text.

Since the working medium adopted by the laser generator is in the form of an optical fiber, its features are affected by the transition properties of the optical fiber. The pump light entering the fiber generally has multiple modes, while the signal photoelectric may have multiple modes. Different pump modes have different effects on different signal modes, making the analysis of laser generators and amplifiers more complicated. The doping distribution in the fiber also has a great impact on the laser generator. In order to make the medium have gain characteristics, working ions (that is, impurities) are doped into the fiber. In general, working ions are evenly distributed in the core. However, the distribution of pump light of different modes in the fiber is non-uniform. Therefore, in order to improve the pumping efficiency, the ion distribution and the pumping energy distribution should be as close as possible. When analyzing the laser generator, in addition to the general principle of the laser generator discussed above, it must also consider its own features, introduce different models and adopt special analysis methods to achieve good analysis results.

So you need to use a 30W or 50W fiber laser for upgrading the engraving area to 7.87" x 7.87" or 11.81" x 11.87".

“It's mind-blowing. It just works. It’s almost like you have to pinch yourself because it’s just that fast,” he said. “It’s cutting four to 10 times faster than a CO2, and it’s using less electricity.”

How thick of metal can a 50W fiber laser cut

There are several laser power options available: 1000W to 1500W, 2000W to 2500W, 2500W to 3000W. These fiber laser machines are fast and precise, with a cutting speed of 35 meters per minute. Laguna Tools also offers machines that have an enclosed area for reducing light pollution.

FSL Muse Pandora features a mirror gallvanometer in the laser head that tracks the laser's path before it cuts and gives a rough idea about the cuts it will make.

How thick of metal can a 50W fiber laser cut
Co2 Lasers

Co2 Lasers

A fiber laser is the best choice if you want to laser cut/engrave aluminum, brass and other metal workpieces.

Before the new machine is packed, the water storage tank is emptied. Please make sure that the water tank is filled with water before turning it on, otherwise the pump will be easily damaged. When the water level of the water tank is below the green (NORMAL) range of the water level gauge, the cooling capacity of the chiller will slightly decrease. Please ensure that the water level of the water tank is within the green (NORMAL) range of the water level gauge. It is strictly forbidden to use circulating pump to drain water.

Base

Plasma can cut any metal that is conductive. This includes reflective metals like aluminum, copper, or brass, which laser machines can't cut.

High precision lenses are used to collimate and increase the energy density in laser machines equipped with fiber laser sources.

Fiber Laser Cutting Machine For Jewelry
Fiber Laser Cutting Machine For Jewelry

Looking for the best Fiber Laser cutting machine? Our team can help you create any item that you may have in mind.

RetinaEngrave V3.0 can import file types including PDF, SVG JPG, BMP and others from any CAD software.

How much oxygen does a fiber laser use

Some acrylic that is made of PVC emits toxic fumes when it is heated. You should always verify the chemical composition of the materials that you are going to engrave.

MCWlaserPRO can be purchased in half pre-assembled. First, fix the vertical columns connecting the laser source module and the laser engraver modules.

Frequently Asked Questions

In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.

Fiber lasers leave unsightly marks on wood.

The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.

Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.