In an optical fiber laser, the light is bent by refraction. An optical fiber cable passes the light through an impurity-free transparent silica glass core. The core is covered with cladding, another layer of silica doped with added materials for lowering its refractive index. Because of their refractive index difference, the light will get refracted at the core-clad interface.
FSL Muse Pandora can operate with open lenses for 254mm,330mm, and420mm lenses. This allows the laser to be focused only on the work material.
The laser source module measures 8.3"x14.9" and the engraving machine module measures 13.8"x22".
Our machines are capable to cut steel, brass or aluminum with no back reflections. These fiber laser machine will significantly reduce your maintenance requirements as well as your operating cost.
Fiber lasers use solid-state lasers extensively in laser engraving and marking machines. The difference between a Fiber laser and a Co2 laser is in their ability laser cut sheet metal.
MCWlaserPRO laser engraver offers three different versions. There are 20W (30W), and 50W options. These lasers operate at 1064nm wavelength.
Fiber lasers are very popular in engraving applications. They have wavelengths ranging from 780nm up to 2200nm.
Getting into the details of the operation cost of both laser and plasma is complicated. So I will write about that in another post.
It will be able to run at the recommended speeds and power rates for steel, aluminum, black acrylic and lexan as well as granite and other materials.
The closer the M2 value is to 1, the tighter the focus spot gets, the more laser energy is delivered at the laser spot. It helps process thicker materials with thin deep wells.
Triumph's 30W desktop fiber laser can engrave on aluminum, gold, silver, steel, stainless steel, copper, and some plastic-like polymer for metal tools and machine parts.
This laser is a pulsed laser fiber laser with 1064 nm wavelength. It has a life expectancy of approximately 25,000 hours.
Just know that the running cost of plasma is lower than laser. In general, it cost about 15/hr to run plasma cutting machines. It takes about 20/hr to run a laser machine.
FM-Desktop has the ability to engrave acrylic, plastics (brick, PVC), granite, marble and tile.
What Materials Can Be Cut With A Fiber Laser? A fiber laser cutting machine can cut sheet metal such as carbon steel, stainless steel, copper, brass, aluminum, and titanium. Fiber lasers outperform CO2 lasers in cutting reflective materials.