Safety glasses should be able to block laser light from 1064 nanometers when purchased for this machine.

Our machines can cut steel, brass and aluminum without any back reflections. These fiber laser machines can reduce maintenance and operating costs.

Plasma can cut any metal that is conductive. This includes reflective metals like aluminum, copper, or brass, which laser machines can't cut.

High precision lenses are used to collimate and increase the energy density in laser machines equipped with fiber laser sources.

Can fiber laser cut MDF

There are several laser power options available: 1000W to 1500W, 2000W to 2500W, 2500W to 3000W. These fiber laser machines are fast and precise, with a cutting speed of 35 meters per minute. Laguna Tools also offers machines that have an enclosed area for reducing light pollution.

FSL Muse Pandora features a mirror gallvanometer in the laser head that tracks the laser's path before it cuts and gives a rough idea about the cuts it will make.

Can fiber laser cut MDF
Mitsubishi

Mitsubishi

So you need to use a 30W or 50W fiber laser for upgrading the engraving area to 7.87" x 7.87" or 11.81" x 11.87".

“It's mind-blowing. It just works. It’s almost like you have to pinch yourself because it’s just that fast,” he said. “It’s cutting four to 10 times faster than a CO2, and it’s using less electricity.”

Laser Engraving

FSL Muse Pandora 20W can deep-engrave silver at speeds of up to 708 ipm, using 100% of the laser power

Higher focal length lenses, which require high concentration power, are used to increase the engraving area.

Perfect Laser
Perfect Laser

Triumph Laser's 30W desktop laser engraver is equipped with EZCAD2.0, a laser control program. EZCAD2.0 lets you create simple shapes and text.

Since the working medium adopted by the laser generator is in the form of an optical fiber, its features are affected by the transition properties of the optical fiber. The pump light entering the fiber generally has multiple modes, while the signal photoelectric may have multiple modes. Different pump modes have different effects on different signal modes, making the analysis of laser generators and amplifiers more complicated. The doping distribution in the fiber also has a great impact on the laser generator. In order to make the medium have gain characteristics, working ions (that is, impurities) are doped into the fiber. In general, working ions are evenly distributed in the core. However, the distribution of pump light of different modes in the fiber is non-uniform. Therefore, in order to improve the pumping efficiency, the ion distribution and the pumping energy distribution should be as close as possible. When analyzing the laser generator, in addition to the general principle of the laser generator discussed above, it must also consider its own features, introduce different models and adopt special analysis methods to achieve good analysis results.

Can a 100w CO2 laser cut metal

Fiber lasers are limited in their focal point. This makes it difficult to use them to cut thicker materials. A CO2 laser is the best choice in such situations.

Fiber lasers do not require as much energy as CO2 lasers. Instead, they operate at a shorter wavelength (780 nm to 2220 nm), giving them a much higher absorption.

Frequently Asked Questions

The wavelength is the primary distinction that determines the types of materials that each laser can process. The wavelength of a fiber laser is typically 1,060 nm, whereas CO2 lasers have wavelengths in the 10,600 nm range. Fiber lasers have many advantages over CO2 lasers in general.

Options for payment The average laser can cost between $50,000 and $250,000, making it a significant asset to a business.

Power consumption is extremely low.

A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.