FM-Desktop also offers an option to increase the marking area. It can be extended to 7.87"x7.87", or 11.81x11.87".
MCWlaser PRO can be used on steel, stainless steel and silver as well as alloys, aluminum, and other metals.
Once you have gained access to the machine using RetinaEngrave Version 3.0, it is possible to begin your first task. This is possible in just 30 minutes.
Contact them via phone, e mail, or social media for after-sales assistance
Mitsubishi Laser has you covered with DiamondFAB, a complete fabrication software solution. Our software is geared for automated hands off management of the production process. We provide full ERP Integration, Nesting, Scheduling, Workflow Management, Automation Control, Part Sorting, and much more.
Plasma, on the other side, can efficiently cut any metal up to 80mm thick and 3 inches in diameter. When cutting thicker materials, plasma can begin cutting much faster than laser.
FM-Desktop offers an optional extension to the marking area. This allows you to extend it upto 7.87"x7.87" or 11.81".
Fiber lasers only have a narrow focal point so it is difficult to use them for cutting thick materials. A CO2 laser would be the best choice.
They offer a dedicated community site for their customers. A small number of communities are also active in Facebook groups.
The auto-focus feature automatically adjusts the laser head position along the Z-axis as per the data received using the 3D camera.
FSL Muse Pandora's 20W version can deep engrave sterling at a speed up to 708 ipm using 100% of its laser power.
In laser engravers, a mirror galvanometer is a series of mirrors in the laser head that move extremely fast to manipulate the path of the laser. A small rotation of 10 degrees at the head is enough to produce 1 3/4" inch of movement at 10 inches. It is also used to trace out the laser paths before engraving or cutting.
When it comes to using the machines, laser cutters and plasma cutters are very similar. The software they use to cut metal is also remarkably similar. So if you have a plasma and want to switch to laser for it’s speed, it will be a very fast learning process.
They also offer a 30-day returns policy and a 2-year parts guarantee for all components, including the fiber laser in FM–Desktop.
Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.