One thing to note is that while using a fiber laser, you will be somewhat limited in the work-bed size and the range of materials you can cut.
The support column (Z axis) holds and controls the laser arm. You can adjust the laser focus by moving the Z axis using the height adjustment knob.
Once you access control to the machine through RetinaEngrave v3.0, you can start your first job. You can do all this in about 30 minutes.
The focal diameter of a fiber laser is small, which allows it to focus the laser light with high intensity. This makes it an excellent choice in permanent high-contrast engraving applications.
Here are a few things you should also know about laser and plasma when it comes to operation and maintenance:
When the water temperature is lower than the ambient temperature and the ambient humidity is high, condensation water will be generated on the surface of the circulating water pipe and the device to be cooled. When the above situation occurs, it is recommended to increase the water temperature or insulate the water pipe and the cooled device.
FM-Desktop is capable of engraving on acrylic, plastics brick, PVC granite, marble, tile and silver as well as steel, brass, brass, and Titanium.
And we’ve been improving the technology—making it do more with fewer resources, making it easier for operators to use, and much more—ever since.
Fiber lasers can be used to engrave metals more efficiently than the generic CO2 lasers.
Raycus 50W fibre laser can engrave on stainless steel at a angle of 90 degrees. This laser uses 100% of its power.
They can work at very high speeds if they have a galvohead. Galvo heads are used in portable laser engraving machines.
Boss Laser has CorelDRAW 2020 available as an optional add-on for the FM Desktop engraver machine.
Fiber laser cutter is a type of CNC laser metal cutting system with high quality, high speed, high precision and high efficiency, which is designed for all types of metal cutting, as well as your good metal working partner. It is equipped with different laser powers (1000W to 40000W) for cutting sheet metals and metal tubes of carbon steel, stainless steel, electrical steel, tool steel, galvanized steel, mild steel, aluminum zinc plate, aluminum alloy, aluminum, titanium alloy, brass, copper, iron, and more metals with different thicknesses.
You don't need to worry about leftover cutting residue such as dross if you can set the parameters correctly in laser cutting.
Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.