Fiber lasers do not have a large focal point. It is therefore difficult to use them to slice thick materials. A CO2 laser will be the best solution in these situations.
3D robotic laser cutting machine with fiber laser source is an industrial 5 axis laser cutter robot from ABB for flexible 3D dynamic metal cut of multi-dimensional and multi-angle. The 3D laser metal cutter with robotic arm is used in 3D curved metal parts, metal tubes, auto parts, kitchenware, electronic components. Now the best 3D laser metal cutting system for sale at affordable price.
Boss Laser provides the FM-Desktop laser engraver in three laser configurations, 20W, 30, and 50W. You can pick them depending on what you need.
Fiber lasers are solid-state lasers used widely in laser marking and engraving machines. The major difference between a fiber laser and a CO2 laser lies in their ability to laser cut sheet metal.
Boss Laser has the FM-Desktop laser engraver available in three configurations: 20W, 30W and 50W fiber laser. You can choose the one that suits your needs.
Its footprint measures 8.3"x14.9", while its engraving machine module covers 13.8x22".
An optical fiber laser bends the light by refraction. An optical fiber cable transmits light through an impure transparent silica core. The core is then covered with cladding. This is another layer of silica, doped with additional materials to lower its refractive index. Due to their differing refractive indexes, light will be refracted at the core-clad interface.
It can be used for flatbed cutting and bevel cutting, and the edges are neat and smooth. It is suitable for precision cutting of sheet metals. In addition, the robotic arm can do 3D cutting instead of the 5 axis laser cutter. Compared with CO2 laser cutters, fiber laser cutters will save space and gas consumption, and has a high photoelectric conversion rate. It is a new power tool of energy saving and environmental protection, and it is also one of the world's leading technological CNC machine tools. 1. High accuracy: The laser positioning accuracy is 0.05mm, and the repeated positioning accuracy is 0.03mm, 2. Narrow slit: The laser beam is focused into a small spot, so that the focus reaches a high power density, the material is rapidly heated to the point of vaporization, and the holes are vaporized. With the relative linear motion of the light beam and the material, the hole continuously forms a narrow slit, and the width of the slit is generally 0.10-0.20mm, 3. Smooth cutting edge: There is no burr on the cutting edge, and the roughness of the cutting surface is generally controlled within Ra6.5., 4. High speed: The cutting speed can reach 10m/min, and the maximum positioning speed can reach 30m/min, which is much faster than other metal cutting tools., 5. High quality: It is a non-contact cutting, which endures little thermal influence, the part basically has no thermal deformation, and completely avoids the slump formed when the material is punched and sheared., 6. Non-destructive cutting: The laser cutting head does not come into contact with the surface of the substrate, ensuring that the parts are not scratched., 7. Good flexibility: Laser has good flexibility to cut any graphics, including metal pipes and other shaped metals, 8. Save mold investment: Laser cutting requires no mold, no mold consumption, no mold repair, saving mold replacement time, thereby saving processing costs and reducing production costs, especially suitable for processing large projects, 9. Material saving: With CNC programming, the parts of different shapes can be cut to maximize the utilization rate of materials., 10. Easy to use: Using CAD software to design graphics, using CAM software to model and output laser cutting files, using CNC controller to drive the machine to achieve automatic metal cutting, 11. Safety and environmental protection: Less waste, low noise, clean, safe and pollution-free, greatly improving the working environment.
It is a pulsed fibre laser with a wavelength 1064 nm. It is expected to last for approximately 25,000 hours.
Gulf States Saw & Machine Co., provides a warranty of two years for all their fiber laser machines. You will also get a 30-day replacement period when you purchase through Amazon.
It is suitable for engraving on metals and can engrave at a maximum speed 11.760 ipm. It can mark complex fonts and images on both smooth and uneven metal parts.
The laser arm is held by the support column (Z-axis). The laser focus can also be adjusted by moving Z-axis with the height adjustment knob.
The exception is you are cutting medium to thick metal plates. At this point, laser starts becoming less efficient. Laser cuts medium to thick plates slower. Plasma interestingly can be much faster than laser when cutting medium to thick plates 25mm or 1inch +. The thicker the metal, the better plasma can do vs laser.
Fiber lasers are used to engrave on metals because they can engrave better than generic CO2 lasers.
Fiber lasers typically cost between $20,000 and $45,000.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.