A cooling system refers to a water chiller, which is used to cool the machine. For example, the electro-optical conversion rate is 33%, and about 67% of the electric energy is converted into heat energy. In order to ensure the normal operation of the equipment, the chiller needs to be cooled by water to reduce the temperature of the whole machine.
Laser cutters are used in many different applications including personalization, digital printing and medical technology.
When it comes to material handling, you need to know the speeds of your machine. The fiber laser machine works really fast hence handling the material might get tough.
A CNC controller controls the movement of the X, Z, and Y axes and sets cutting parameters like power and speed.
A cooling unit is a water heater that is used to cool the machine. For example, an electro-optical transformation rate of 33% is used, and approximately 67% is converted into electric energy. To ensure that the equipment runs smoothly, the chiller should be cooled using water.
A fiber generator is the best choice for cutting sheet metal or metal tubes. There are many brands available, including Raycus Raycus Raycus MAX and JPT. If you need to engrave/cut wood, acrylic and leather, a CO2 glass lasertube is the right tool for the job.
An automatic 5 axis laser cutting robot has a price range from $49,000 to $83,500 for flexible 3D dynamic metal cut of multi-angle and multi-dimensional in industrial manufacturing.
First, check that all the connections are correct. This includes power supply, exhaust system, and PC. Visually inspect the condition of your machine. Make sure all machinery is moving freely and there is no material underneath the processing table. Clean the work area, including optical components, and wash them if necessary. You can find more information in the "General Maintenance” section. Check the exhaust system, and if necessary, start the cooling. Verify that the exhaust system's filter and activated carb are installed according to the instructions. After checking, close your protective cover.
With fusion cutting, the material is heated by the laser beam up to the melting point and forced out of the kerf by a high-pressure stream of cutting gas (up to 25 bar). As with sublimation cutting, an inert gas, usually nitrogen, is used to force the molten material out of the cut.
First, consider the scale of your company, what materials you require cutting, and how thick they are. Then, confirm the power supply and size of the workbench as per your needs. You can customize the table size to fit your needs.
High energy density spots are formed by focusing the laser beam's energies. The medium and extended focusing lens are suitable for thick plates cutting. It also has very low spacing stability requirements. The shorter focusing lens is best suited for thin sheets cutting. This requires high spacing stability of the tracking systems and greatly reduces output power requirements.
The optical path system concentrates the laser beam produced by the laser generator to produce a beam with high power density. The beam is irradiated onto part surfaces to cause them to reach a boiling point. In addition, the beam's high-pressure gas coaxial blows away molten materials. The beam moves in relation to the part. This allows the material to be cut.
Typical materials used in flame cutting, or oxygen cutting / Oxyfuel, are low-alloy steel, also referred to as mild steel stainless or aluminum, and cast irons.
GSS Machinery laser systems are designed to be as easy to use as a paper printer, you can create a design in a graphic software program of your choice and print it directly to the laser cutting machine.
Laser cutters can cut all types of metals, including mild steel, stainless steel, and nonferrous metals.
Polycarbonate is an unsuitable material for laser cutting. ABS It emits cyanide gas and melts. ABS is difficult to cut with a laser cutter. It melts rather than vaporizes, and it is more likely to catch fire and leave melted gooey deposits on the vector cutting grid.
'The effect that powerful lasers have on actual flesh varies both with the wavelength, or color, of the light and the duration of the pulses that they produce,' as you might expect. The real discovery of these researchers, however, is that lasers cut flesh by causing a series of overlapping micro-explosions.