In order to make the machine easy to use, an user-friendly controller and powerful CAD/CAM software based on Windows and macOS are indispensable. Some of them are free with simple functions, while paid software is more professional for your business. All depends on your business needs.
The costs of various types vary, from entry-level to eco-friendly or high-end models.
A basic laser cutter costs between $2,600 and $8,800. It comes with an 80W CO2 laser tube. This is for hobbyists, beginners, hobbyists, home users, small businesses, and professionals. However, high-end laser cutting machines can cost as much as 279,000.00 and include a 12000W IPG fiber power supply for metal fabrication.
Laser cutting machines are classified into fiber laser machines and CO2 laser machines based on laser sources.
Laser Cutting Systems offers fiber laser (straight cutting) machines, fiber laser plasma combination machines, and bevel cutting CO2 laser machines. Learn More.
As already mentioned above, laser cutting technology finds its uses in various fields. It starts from electronics, medicine, defense industry, automotive and ends in the healthcare and design industry. The most prominent application of laser cutters is cutting any kind of metal.
It is strictly forbidden to turn on the chiller when there is no water or the water level is too low to avoid damage to the water cooling equipment. It is strictly forbidden to squeeze or step on the water inlet and outlet pipes of the chiller to keep the water passages unblocked. The laser beam will cause burns when it irradiates the human skin. Staring into a laser beam for extended periods of time can cause serious damage to the retina of the eye. Operators must wear goggles. The equipment will generate a lot of smoke and dust when cutting certain plates, so the outlet pipe of the fan should be led to the outside, or an air purification device should be installed. In addition, operators should wear dust masks to prevent the occurrence of occupational diseases. When the temperature is below 0 °C for a long time, the cooling water in the water cooler, laser and water pipeline should be drained to prevent the cooling water from freezing when the temperature is too low, causing damage to equipment and pipelines. Check the protective lens inside the cutting head once a day. When the collimating mirror or focusing mirror needs to be disassembled, record the disassembly process. Pay special attention to the installation direction of the lens and do not install it wrong. Turn off the air source and power supply when off work, and the residual air belt in the machine pipeline should be emptied at the same time. If you leave the machine for a long time, please turn off the power to prevent unprofessional operation. Pay attention to observe whether there is lubricating oil on the surface of the horizontal and longitudinal guide rails and the frame of the machine, and maintain good lubrication. If there is an automatic height adjustment device, check whether it is sensitive and whether to replace the probe.
Due to the thin incision of the fiber laser, the gas consumption is large (especially when cutting with nitrogen).
Focus the energy of the laser beam and form a high energy density spot. The medium and long focusing lens is suitable for thick plate cutting, and has low requirements on the spacing stability of the tracking system. The short focusing lens is only suitable for thin sheet cutting, which requires high spacing stability of the tracking system and greatly reduces the output power requirements.
This pretty much sums up our writing about the laser cutting machines and engraving machines. After figuring out what kind of work you need from your machine, you just have to look at the relevant specs of the machines.
Do you want to build a laser cutter kit plan with CO2 laser tubes?
The laser's interlocked steel enclosure has a class 2 safety rating. This allows it to be used safely in any home, workshop, or office.
Smaller wavelength also contributes to better focus and higher intensity as well. One drawback of these cutters is that their parts wear out because of the high power functionality.
The cost of a professional laser tube cutter machine starts at $50,000. It can be used to cut any type of metal tubing.
Laser cutters can cut all types of metals, including mild steel, stainless steel, and nonferrous metals.
Polycarbonate is an unsuitable material for laser cutting. ABS It emits cyanide gas and melts. ABS is difficult to cut with a laser cutter. It melts rather than vaporizes, and it is more likely to catch fire and leave melted gooey deposits on the vector cutting grid.
'The effect that powerful lasers have on actual flesh varies both with the wavelength, or color, of the light and the duration of the pulses that they produce,' as you might expect. The real discovery of these researchers, however, is that lasers cut flesh by causing a series of overlapping micro-explosions.