Does CO2 laser work on arms

Tube Lasers Cutting Systems Los Angeles

A laser cutter that cuts sheet metal can transform a sheet of paper in seconds. You can also do the same with a laser tube cutter machine but it is a completely different story about how it is done.

Some things can be quite obvious. The fiber laser "generator", as it is called, is smaller than traditional CO2 resonators. The fiber laser is actually created by banks and modules of diodes. They can be assembled into a compact module with a power range of 600 to 1,500 watts. A number of modules are combined to make the final powered receiver, which is often the size of small filing cabinets. The light is amplified and channeled through fiber-optic cabling. The fiber-optic cable transmits the light exactly as it was before. This ensures that there is no loss of quality or power. Then, it is adjusted and focused according to the material being cut.

A fiber laser's operation can reveal some subtleties that are not obvious. The fiber laser beam has a much higher power density than the CO2 laser beam due to its smaller beam diameter. This not only allows the fiber laser to cut faster but also allows it to pierce quicker. The fiber is able to cut complex shapes and leave sharp edges because of the smaller beam size. Imagine cutting out a company logo from a tube, with letters spaced at 0.035 inches. A fiber can do that while a CO2 laser cannot.

A job shop is only as diverse as the parts it produces. The same applies to those who operate a tube laser. Parts of different sizes can be found in one tube. Laser-cut parts as small as 2 inches must be unloaded by the machine. Each one can be as long as 15 feet. You must also be able unload the parts without damaging them. This can be difficult with soft metals like aluminum.

Glass

Glass

Tubes are essential building blocks, whether it's the production of equipment for gyms or small, multifunctional exercise machines that can be used in domestic spaces. Tube processing technologies such as laser cutting and bending are widely used in this industry.

When you look closely at a fiber-laser in operation, some things may not be as obvious. A fiber laser's beam diameter is one-third larger than that of a co2 beam. This allows it to have a higher power density. This allows the fiber not only to cut faster but also to pierce much faster. The fiber's smaller beam size allows it to cut intricate shapes, and leave sharp edges. Imagine cutting the logo of your company from a tube where the spacing between the letters is 0.035inches. A fiber can achieve that cut while a laser with CO2 cannot.

Tube Laser Cutting Systems Menomonee Falls Wi

Shape laser technology allows for a complete customization and cut-to-length capabilities in just one step. Finished or semi-finished parts are produced from raw material.

Whatever your customers' requests, with Lasertube you can recommend improvements to part design from the extensive library of connectionsfor assembling without screws or welds.

Tube Laser Cutting Systems Menomonee Falls Wi

Systems

What can you do to compensate? You will traditionally touch your face with a sensor to mark the contact point. The tube is then turned and touched on the other side. This gives the control an indication of how bent the tube is. This is a reliable method that can guarantee the through-holes are working for the application. However, this method reduces the ability to deliver extremely high tolerances for each rotation of the tube.

Lasertube systems are a great way to improve or create new applications. They also allow you enter new industrial areas and increase your profit margins.

Steel Tube Lasers

Get exactly the right solution to your specific laser fabrication needs while delivering process quality and efficiency to metal and non-metal fabricating.

Let's take a look at the benefits of an automated tube and section bar storage with a Lasertube cutter system.

Tube Lasers Cutting Systems Los Angeles
Tube Laser Cutting Systems Menomonee Falls Wi
Laser Tube

Tubes, profiles and systems are everywhere. They're used for everything from mechanical engineering to system construction to furniture making. With the new possibilities that lasers present, designers are increasingly taking advantage of laser-cut tubes or profiles. This has led to a substantial increase in demand. TruLaser Tube machines are a complete solution for laser tube cutting.

Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.