Laser Cutting Machine Beam

What Can a 150w Co2 Laser Cut

The laser resonator is the powerhouse of any laser cutting machine. It consists of a glass tube with two mirrors placed with their faces facing each other. The tube consists of gases like CO2, hydrogen, nitrogen, and helium.

This laser cutter can cope with a range of materials, including wood, bamboo, plexiglas, crystal, leather, rubber, marble and ceramics, although not metal. It with dimensions of approximately 72 x 56 x 41 inches, you're going to need a lot of space to accommodate it.

Adjust the position and height of the cutting blade. After all preparations are complete, you can start cutting.

Laser cutting is a fabrication process that utilizes a high-powered laser beam on a laser cutting machine to cut the material into various shapes and designs. The laser cutting process is suitable to cut a wide range of materials including metal, plastic, wood, gemstone, glass, and paper. A key benefit of laser cutting is that this process can generate precise and complex parts without any need for custom-designed tooling.

How Thick Can 150w Laser Cut

With flame cutting, also known as oxygen cutting, a material is heated only to its ignition temperature. Oxygen is used as cutting gas so that the material burns and forms a pure stream of oxide that melts through the additional energy from burning. The cutting oxygen then forces the slag out of the cut piece part.

STJ1390M hobby hybrid CO2 laser cutting machine with 280W Yongli combined beam laser tube, which can cut up to 3mm stainless steel, 4mm carbon steel, 30mm acrylic, 25mm wood. Now the best budget hobby laser cutter for sale at low price.

How Thick Can 150w Laser Cut
Laser Engraver

Laser Engraver

2022 best budget small metal laser cutter ST-FC1390 adopts fiber laser generator, fully enclosed design, environmental friendly in all types of sheet metal cutting, which is a compact entry level fiber laser cutting system for hobbyists in small business with metal signs, metal tags, metal logos, metal letters, and metal jewelry, now the hobby fiber laser metal cutting machine for sale at a low price.

Waveguide laser tubes from GSS Machinery are the most advanced in the field. GSS Machinery laser tubes offer the best engraving and cutting results. They have faster switching rates, higher CO2 gas pressure and an optimized beam.

Laser Paper Cutting Systems

A professional laser tube cutting machine cost starts around $50,000 with CNC controller for any types of metal tubing.

Experts specializing in industrial marking machines for more than 10 years, specializing in various solutions for providing laser marking machines and dot peen marking machines.Good at marking solutions in the energy, aerospace, automotive, electronics, metal processing, medical industries etc.

Steel
Steel

The laser generator emits a beam which is then focused by the optical path to form a laser beam with high power density. The beam is irradiated onto parts to heat them up or bring them to boiling point. High-pressure gas, which is coaxial with the beam, blows out any molten material. The beam's movement relative to the part causes the material to be slit, thus achieving its purpose.

CO2 laser cutting systems are able to cut variety of thin metal and non-metal materials of wood, MDF, plywood, chipboard, acrylic, plastic, PMMA, leather, fabric, cardboard, paper, rubber, depron foam, woodleather, wood paper, EPM, gator foam, polyester (PES), polyethylene (PE), polyurethane (PUR), neoprene, textile, bamboo, ivory, carbon fibers, beryllium oxide, polyvinyl chloride (PVC), polyvinyl butyrale (PVB), polytetrafluoroethylenes (PTFE / Teflon), phenolic or epoxy resins, and any materials with halogens (fluorine, astatine, iodine, chlorine, bromine).

Jewelry

Marking is the kind of operation in which the laser does not penetrate fully into the substrate material. It only changes the properties and the appearance of the material. When the laser comes in contact with the substrate, it creates high contrast marks because of the heat of the beam.

GSS Machinery highspeed CO2 laser machines can be customized to suit your budget and processing requirements.

Frequently Asked Questions

Polycarbonate is an unsuitable material for laser cutting. ABS It emits cyanide gas and melts. ABS is difficult to cut with a laser cutter. It melts rather than vaporizes, and it is more likely to catch fire and leave melted gooey deposits on the vector cutting grid.

Laser Cutting Process Drawbacks
When compared to other techniques, laser cutting requires a high power consumption.
The laser beam is extremely delicate to handle.
If the laser beam comes into contact with human workers, it is hazardous.
Laser cutting is still unable to cut thick metals.

Cutting thick materials is difficult.
The less effective laser cutting becomes as the material thickness increases. For example, when it comes to cutting thick sheets of carbon steel, laser cutting may be difficult.