The cost of a fiber laser cutter machine ranges from $8,800.00 up to $260,000.00 A CO2 laser cutter can be purchased for between $2,600.00 and 68,800. A mixed-generic laser cutting system can cost from $6,800 up to $32,500
Regular cleaning of the motor ring is necessary to maintain the machine's operation and ensure accurate cutting.
The power supply's wattage is an important factor in determining cutting capability. You can use a lower power supply to cut thin sheets. Higher material thicknesses require a higher power supply. This is beneficial for companies to manage costs.
Laser wood cutting machines are cheap and available for as low as $3,000 to $10.800. They have CO2 laser powers of 80W. 100W. 130W. 150W. 180W.
Next, press and hold the main switch. This will turn on main power. Turn on the key switch to the control panel. This is machine specific and not applicable to all lasers. After startup, the system can start to quote if all covers that have safety circuit breakers are closed. After turning on the machine the table will move all-the-way down while the pro laser head (located in upper left corner) moves to zero. When the LED light flashes slowly and steadily, it is safe to say that the machine has completed its reference process.
The laser's interlocked metal enclosure carries with it a class 2 safety rating, which allows for safe use in any workshop, home, or office.
Whether you need to cut hardwood, plywood, mdf, basswood, balsa wood, leather, fabric, paper, cardboard, or other sheet materials, we have a laser cutting machine for you!
There is absolutely no restriction. It can equally cut steel, aluminum, tungsten, brass, nickel, or iron. It does so with such a nice finishing and accuracy that it is impossible to resort back to those old-fashioned metallic cutters.
Laser cutting is a fabrication process. It consists of a very thin, invisible but focused laser beam that cuts and engraves the substrate material. It can either be used to cut through the material or it can be used to create logos, patterns, designs, and write text or numbers.
To maintain the cleanliness of the equipment, the staff must use a vacuum to clean it every week.
Since it is thermal cutting, in the process of multi-layer cutting, the edge part is easy to stick, which has a great impact on the cutting quality.
Debug your equipment again and adjust the focus of the cutting head so that it is in the correct position.
A laser cutting machine system includes the core components laser generator and laser generator as well as beam transmission components and laser cutting table.
With the Fusion Pro Series, you can add a fiber light source to your CO2 Laser machine. A dual source laser system will enhance your capabilities and help you increase your product lines and profits.
Polycarbonate is an unsuitable material for laser cutting. ABS It emits cyanide gas and melts. ABS is difficult to cut with a laser cutter. It melts rather than vaporizes, and it is more likely to catch fire and leave melted gooey deposits on the vector cutting grid.
Laser Cutting Process Drawbacks
When compared to other techniques, laser cutting requires a high power consumption.
The laser beam is extremely delicate to handle.
If the laser beam comes into contact with human workers, it is hazardous.
Laser cutting is still unable to cut thick metals.
Cutting thick materials is difficult.
The less effective laser cutting becomes as the material thickness increases. For example, when it comes to cutting thick sheets of carbon steel, laser cutting may be difficult.