Our laser cutting machines can be used to cut hardwood, plywood and mdf as well as balsa, basswood, balsa, leather, fabric, cardboard and other sheet materials.
There is one very interesting application of laser technology that is worth mentioning here. It has made its way to surgical wards and is replacing metallic cutting tools like scalpels etc. It is being used nowadays to vaporize human tissues and cells.
GSS Machinery metal and ceramic laser tubes combine the benefits of longer life and lower recharge costs, while providing a higher-quality cutting and engraving.
A laser generator can be described as a component that produces a beam. Fiber laser generators are suitable for all types sheet metals and tubes. CO2 lasers can be used to produce wood, plastic, acrylic and leather.
The refractive mirror is the key component of the beam delivery unit. This is used for directing the beam in the desired direction. A protective cover covers the reflector and protects it from contamination with a positive pressure protective gas.
The amazing motion control that is built into laser machines allows them to engrave high resolution graphics at high speed. Your customers will be amazed by the images you can engrave!
Laser cutters may be divided into laser metal, laser wood, and laser leather cutters.
Laser cutters include a laser controller, machine frame (or laser generator), power supply, laser tube, lens, water chiller, stepper or servomotor, gas compressor, gas storage tank and dryer, as well as computer numerically controlled systems such as CNC laser software and air compressor.
The FLCAJ’s fiber engine, combined with the fiber optic delivery cable, has greatly reduced machine operating costs and required maintenance. With no laser gas, mirrors, or moving parts in the laser source, and by consuming a fraction of the energy required by a comparable CO2 laser, the FLCAJ series makes laser processing more economical than ever before.
Laser tube cutting machines can cost as little as $50,000.
No matter if you need to cut wood, plywood, mdf or basswood, leather, fabric, paper or cardboard, we have a laser cutter machine that can do it all!
The refractive lens is the primary component of beam delivery assemblies. It directs the beam in a desired direction. Protective covers are used to cover the reflector. To prevent contamination, a clean, positive pressure protective gas is added.
You can adjust the system's cutting parameters based on the thickness and material of the raw material.
Typical materials used in sublimation cutting are wood, plastic, composites, Plexiglas (PMMA), ceramics, cardboard, paper, foam, and other materials without a melting point. Thin metals can also be cut through sublimation cutting.
The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.
The Best Laser Cutter for Extensive Designing
Orion Motor Tech Upgraded Laser Engraver. This spiffy-looking machine is one of the best on the market right now. ...
Beamo 30W Desktop Laser Cutter. ...
Ten-High 4060 Laser Cutting Machine. ...
Dremel LC40-03 Laser Cutter. ...
Orion Motor Tech Laser Engraver Cutter.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.