Let's see below the advantages of using an Automatic Tube and Section Bar Storage System with a Lasertube Cutting System.
Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.
The CO2 solution for large diameter tubes and profiles.Tubes up to Ø 14" / 24" (355 mm / 610 mm)3D cutting modeCO2 laser
It's a third of a full 20-foot (240") tube, making it convenient to create three pieces of stock. This allows you to still purchase full tube lengths without wasting any material
Get medical device manufacturing with precision and maximum uptime with Coherent laser systems for cutting, welding, drilling, texturizing, and marking.
Gulf States Saw & Machinery Co., Inc. has the capability to produce tube lasers that can be used to replace manual processes or optimize the cutting process.
These images are intended to be used as illustrations and may not accurately represent the product. Gulf States Saw & Machinery Co., Inc. reserves all rights to modify product specifications and images at any time.
Some machinery manufacturers use cameras to check tubes. This is done in an effort to close the time gap. Cameras reduce the time required to check quality and reduce the number rotations. This ensures that the machine can retain its productivity and accuracy.
Metal fabricators understand the benefits of fiber laser cutting technology in flat sheet processing. But do they know what it can do for tube and tube cutting? You can actually find quite a bit.
Lasertube systems are our 2D and 3D laser cutting systems for tubes, bars and profiles, from 12 mm to 610 mm (.5” to 24") in diameter and up to 18 m (60') in length.
How can you compensate? Traditionally, you would touch the contact points by coming down. Next, rotate the tube and touch the opposite side. This will give the control an indication about how bent the tube may be. This can be used to ensure that through-holes fit the application. Be aware that this reduces your ability to deliver very precise tolerances every time the tube rotates.
This machine can be used for processing XXL-sized tubes. This machine, which is a solid state laser, can be used in many ways to make tubes and profiles.
StarCut Tube, a laser tube cutter machine StarCut Tube, offers unparalleled precision with contour cutting accuracy of +/-5um.
No downtime or extended lead times: By combining a tube mill and tube laser in a single facility, we can move your project through each stage with no gaps or delays. We are a full line service center that will:
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.
What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.