You might have noticed that cutting speed has not been discussed yet. While it is possible for a tube to be cut at up to 500 inches per min, that is not always possible. Laser tube cutting requires that you focus on the time it takes to load a tube and index it in order to cut. Laser tube cutters are slow and take a lot of time to process parts.

Lasertube systems are a great way to improve or create new applications. They also allow you enter new industrial areas and increase your profit margins.

The laser cutting system StarCut Tube SL provides highest accuracy, superior reliability, and high performance when cutting complex medical devices such as stents, aortic valve replacements, or hypotubes.

High cutting performance is a hallmark of CO2 lasers. They are most useful in medium-to-high material thicknesses. Laser beam cutting edges are low-scoring and throughburr-free. The laser beam can also be used to cut additional parts without the need for rework.

Do laser engravers use a lot of electricity

Gulf States Saw & Machinery Co., Inc. is able to manufacture tube lasers for customers, allowing them to eliminate manual processes and maximize the cutting process.

With Coherent laser systems, you can achieve precision in medical device manufacturing.

Do laser engravers use a lot of electricity
Tooling

Tooling

Tubes are fundamental building blocks for any type of manufacturing, including equipment for gyms and smaller multifunctional machines for homes. This is why many tube processing technologies like laser cutting or bending are so popular in this sector.

The tube laser cutting solution has the greatest working range. Tubes upto O 9.45" (240mm), 3D cutting modeCO2 OR fiber laser

Valuable Industry Resources

Traditional tube features can prove time-consuming. FabLight makes fabLight easy. You can get exactly what and how much you want - in minutes!

Imagine that you have to position a through-hole on top of a tube. It must be centered on the tube's actual dimension. It will be more difficult to center the tube if it is bent. This is the reality of tube fabrication.

Tube Lasers Cutting Systems Of America
Tube Lasers Cutting Systems Of America

Our tube laser manufacturing capabilities allow Gulf States Saw & Machinery Co., Inc. to offer our customers the opportunity to replace manual processes and improve the cutting process.

Laser tube cutting machines do not have standard material towers. Bundle loaders provide the fastest method of handling tube material. One tube is fed from a bundle into the tube laser by a singularizing system. This type isn't able to feed open profiles like angles and channels. They interlock in the bundle and are not easy to get free. Step loaders can be used to sequence open profiles one by one into the machine, while still maintaining the proper orientation.

Tube Lasers Cutting Systems Usa Inc

Many thought fiber lasers could only be used for thin materials at one time. Due to its longer wavelength, CO2 produced enough kerf for the cutting of thick materials so that there was enough room for material removal. However, the fiber laser wasn't able to produce the same kerf in thicker materials. The problem was solved in recent years by collimating technology which allows for a wider beam of fiber laser-generated light that can be used to create materials separation. Because the beam width can be switched, the machine can use a narrower beam to process thin material. This makes it possible for the machine to process different-sized materials faster on the same fiber laser cutter machine.

A laser cutting machine can make a sheet of sheet metal in seconds. However, a laser tube cutting machine can achieve the same results. It is quite different from how it works.

Frequently Asked Questions

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.

What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.

from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.