Parts can be held with automatic tabbering (in FabCreator), as well as a set of jaws at the drive chuck, and the idler-chuck.
It's one-third of a full 20 foot (240") tube. Therefore, it is convenient to make three stocks. This allows you still to buy full tube lengths, without having any wasted material.
We offer a tube extender for loading tube stock of up to 80" (6'8") You can still use the tube extension to load stock up to 80" or 6'8".
StarFiber Series combines compact fiber lasers with optional cutting heads or focusing heads for laser welding and cutting. SmartWeld(tm), which allows for fine and broad welds, is also available.
You can find the right technology to meet your needs. You have the option of either CO2 laser or fiber laser cutting systems depending on what materials you are working with and how much productivity and quality you desire.
Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.
StarFiber Series combine compact fiber lasers with optional focusing heads for laser welding or cutting, including SmartWeld™ technology for fine and wide welds.
A laser tube cutting machine doesn't come with any standard material towers. Bundle loading is the best option for handling tube material. It feeds one tube at a given time from the bundle into a tube laser using a singularizing process. This type cannot be used with open profiles (e.g. channels and angles), because they interlock inside the bundles and don’t move freely. Step loaders, which are used for open profile profiles, sequence one section at time into the machine while maintaining the correct orientation.
The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.
ExactCut 430 laser cutting machine is a precise laser cutting system that automates the processing of thin and heavy metals, alloys, brittle materials such as sapphire, PCD and ceramics.
PowerLine C are CO2 laser-based systems for precision drilling, cutting, scribing, marking, and engraving of many non-metals, including glass, organic materials.
StarCut Tube is a tube-cutting laser machine that offers precision up to +/- 5um.
StarCut Tube L 600 comes with a fiber or USP laser. StarCut Tube SL, a compact model that has the smallest footprint available on the market, is the StarCut Tube SL.
Laser fabrication solutions that meet your exact needs are available. They also offer process efficiency and quality for metal and non-metal fabrication.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.
What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.