Medical device manufacturing is possible with precision and maximum uptime using Coherent Laser Systems for cutting, welding drilling, texturizing and marking.

This is the tube laser cutting solution that offers the most versatility. Tubes up to O9.45" (240mm)3D Cutting modeCO2 or Fiber Laser

At one time many thought that fiber lasers could be used only for thin materials. The CO2, with its larger wavelength, created enough kerf during the cutting of thick materials that enough space was allowed for material removal; the fiber laser couldn’t produce the same kerf or results with thicker materials. But that has been addressed in recent years with collimating technology that can produce a wider fiber laser-generated beam that creates materials separation and room for material removal in thick materials. And since the beam width is switchable, the machine can use the narrower beam to process thin materials, which allows for faster processing of different-sized materials on the same fiber laser cutting machine.

This is a third of the full 20-foot (240") length of a tube. It makes it easy to make three stock pieces. You can still buy full length tubes without having to waste any material

Why is my laser not cutting

The TruLaser Tube 5000 fiber achieves record speeds. It takes full advantage of the strengths of solid-state lasers. For the user, this means short processing times and a wide range of possible parts.

Laser system that combines sheet and tube metal cutting. Tubes upto O 4.72" (120mm).Sheets upto 236"x79" (6000mm x 2000mm)Fiber Laser

Why is my laser not cutting
Tube Laser Cutting Systems 6090

Tube Laser Cutting Systems 6090

The tube's inherent nature means that a laser generator is not required. While flat sheet laser cutting machines are now available with laser generators of up to 12 kW, tube-cutting machines typically require a maximum power of 5 kW. Tubes require you to be aware of the opposite side when cutting. A more powerful laser would cut through the tube's other side. (Officially, the tube laser can be used to process a beam or channel.

Shape laser technology allows complete customization and cutting-to-length capabilities in just a single step. You can make finished or semifinished parts from the raw material.

Tube Laser Cutting Systems Union Grove Nc

These laser-generating machines can produce up to 12 kW of power. The power of a laser tube cutter machine is typically 5 kW. This is because it cuts through the tube on the opposite side simultaneously.

The StarFeed is an automated loader/unloader for the StarCut Tube laser cutting machine and is available in sizes S and L. This combination allows fully automated dry or wet cutting of tubes from 1-20 mm diameter. The StarFeed L stores up to 48 tubes and even allows the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. The end result is a big increase in productivity.

Laser Pipe Cutting Machine India
Laser Pipe Cutting Machine India

The CO2 reactor is larger and consumes more energy. To produce the laser beam, electricity is added to a mixture gas mixture. Mirrors are used to increase the intensity of light, and prepare it for exiting a resonator. The beam must travel through the path of several cooled reflectors until it reaches lens once it has left the resonance. This travel can cause a loss of power or quality in the laser beam.

This is your easiest route to tube laser cutting. Tubes as large as O 4,72" (120mm).2D cutter laser

Diameter

The tube cutting laser machine StarCut Tube offers the ultimate precision, with contour cutting accuracies better than +/- 5µm.

Fitness equipment must be built with the highest standards of design, durability, usability, efficiency, and compactness.

Frequently Asked Questions

Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.

The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.