Get medical device manufacturing with precision and maximum uptime with Coherent laser systems for cutting, welding, drilling, texturizing, and marking.
Gulf States Saw & Machinery Co., Inc. has the capability to produce tube lasers that can be used to replace manual processes or optimize the cutting process.
The CO2 solution for large diameter tubes and profiles.Tubes up to Ø 14" / 24" (355 mm / 610 mm)3D cutting modeCO2 laser
It's a third of a full 20-foot (240") tube, making it convenient to create three pieces of stock. This allows you to still purchase full tube lengths without wasting any material
These images are intended to be used as illustrations and may not accurately represent the product. Gulf States Saw & Machinery Co., Inc. reserves all rights to modify product specifications and images at any time.
Some machinery manufacturers use cameras to check tubes. This is done in an effort to close the time gap. Cameras reduce the time required to check quality and reduce the number rotations. This ensures that the machine can retain its productivity and accuracy.
StarCut Tube, a laser tube cutter machine StarCut Tube, offers unparalleled precision with contour cutting accuracy of +/-5um.
No downtime or extended lead times: By combining a tube mill and tube laser in a single facility, we can move your project through each stage with no gaps or delays. We are a full line service center that will:
Let's see below the advantages of using an Automatic Tube and Section Bar Storage System with a Lasertube Cutting System.
Fiber lasers have wavelengths of 1.06 microns. This wavelength is 10 percent lower than the CO2 laser beam. Fiber lasers have a much shorter wavelength which makes them more able to absorb reflective material. CO2 lasers are more likely reflect off these surfaces. Fiber laser cutting machines can be used to cut brass and copper as well as other reflective materials. The machine's laser beam, as well as the beam path, can be damaged by a CO2 laser beam reflected off the material. This risk is eliminated if the beam path is used with a fiber optic cable.
How can you compensate? Traditionally, you would touch the contact points by coming down. Next, rotate the tube and touch the opposite side. This will give the control an indication about how bent the tube may be. This can be used to ensure that through-holes fit the application. Be aware that this reduces your ability to deliver very precise tolerances every time the tube rotates.
This machine can be used for processing XXL-sized tubes. This machine, which is a solid state laser, can be used in many ways to make tubes and profiles.
Whether it is the manufacture of specific equipment for gyms, or smaller, multifunctional exercise machines for domestic spaces, tubes are the fundamental building blocks. This is why tube processing technologies, such as bending and laser cutting, are so widely used in this sector.
Lasertube lets you customize part designs to meet the needs of your customers.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
A fiber laser cutting machine generates a laser beam using active optical fibers and transmits it to the machine's cutting head via a transport fiber. This extremely hot laser is condensed into a narrow beam and is used to cut through various metal thicknesses.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method. It can also be used on a variety of materials in a variety of shapes and sizes.