StarFiber Series combine compact fiber lasers with optional focusing heads for laser welding or cutting, including SmartWeld™ technology for fine and wide welds.

A laser tube cutting machine doesn't come with any standard material towers. Bundle loading is the best option for handling tube material. It feeds one tube at a given time from the bundle into a tube laser using a singularizing process. This type cannot be used with open profiles (e.g. channels and angles), because they interlock inside the bundles and don’t move freely. Step loaders, which are used for open profile profiles, sequence one section at time into the machine while maintaining the correct orientation.

We offer a tube extender for loading tube stock of up to 80" (6'8") You can still use the tube extension to load stock up to 80" or 6'8".

StarFiber Series combines compact fiber lasers with optional cutting heads or focusing heads for laser welding and cutting. SmartWeld(tm), which allows for fine and broad welds, is also available.

Tube Laser Cutting Systems 2020

StarCut Tube L 600 comes with a fiber or USP laser. StarCut Tube SL, a compact model that has the smallest footprint available on the market, is the StarCut Tube SL.

Laser fabrication solutions that meet your exact needs are available. They also offer process efficiency and quality for metal and non-metal fabrication.

Tube Laser Cutting Systems 2020
Tube Laser Cutting Systems Menomonee Falls Wi

Tube Laser Cutting Systems Menomonee Falls Wi

PowerLine C are CO2 laser-based systems for precision drilling, cutting, scribing, marking, and engraving of many non-metals, including glass, organic materials.

StarCut Tube is a tube-cutting laser machine that offers precision up to +/- 5um.

Tube Laser Cutting Systems 5050

We offer a tube extension for loading tube stock up to 80", or 6'8". Note that the maximum part size remains 52"

We haven't talked about cutting speed, you may have noticed. You can cut up to 500 inches per hour on a tube but it's not always possible. The main focus of laser tube cutting is how long it takes to load the tube, index it so that it's in the right spot for cutting, then pierce and slice it. Laser tube cutting machines have a slower cutting speed than they do with parts.

Lasers
Lasers

Parts can be held with automatic tabbering (in FabCreator), as well as a set of jaws at the drive chuck, and the idler-chuck.

It's one-third of a full 20 foot (240") tube. Therefore, it is convenient to make three stocks. This allows you still to buy full tube lengths, without having any wasted material.

What can you do with old laser tubes

You can find the right technology to meet your needs. You have the option of either CO2 laser or fiber laser cutting systems depending on what materials you are working with and how much productivity and quality you desire.

Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.

Frequently Asked Questions

Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.

The laser beam is the most important component of the laser cutter; it determines wavelength and power, and thus the material that it can cut or engrave. Solid-state lasers, fiber lasers, and CO2 lasers are the three main types of lasers used in laser cutting.