Tube Lasers Cutting Systems Nj

How does a tube laser work

Let's look below at the advantages of using an automatic tube and section bar storage system with a Lasertube cutting system.

Lasertubes are 2-D and 3-D laser-cutting systems for tubes, bars, and profile. Available in diameters of 12 mm to610 mm (.5"-24"), and up 18 m (60').

PowerLineC CO2 laser-based systems that can precision drill, cut, scribing mark, and emboss many non-metals like glass and organic material.

Some things are quite noticeable. The laser “generator” on a fiber laser is much smaller when compared to a traditional CO2 resonator. In fact, the fiber laser is created by banks of diodes that are put together in a briefcase-size module that can range in power from 600 to 1,500 watts. Multiple modules are spliced together to create the final powered resonator, which is typically the size of a small filing cabinet. The light generated is channeled and amplified through fiber-optic cable. When the light exits the fiber-optic cable, it is the same that is was upon being generated with no loss of power or quality. It is then adjusted and focused for the type of material to be cut.

Tube Lasers Cutting Systems Ypsilanti Mi

The product images used are only for illustration and may not be exact representations of the product. Gulf States Saw & Machinery Co., Inc. reserves a right to amend product images or specifications at any given time.

Laser tube cutting at home doesn't have to be complicated or expensive. Students and engineers alike can cut like never seen before

Tube Lasers Cutting Systems Ypsilanti Mi
Cutting Machines

Cutting Machines

Monaco high-power, femtosecond-lasers offer superior edge quality for micromachining and improved scientific applications such as three-photon microscopy.

The high cutting speed of CO2 lasers is what makes them stand out. Their main application area is the medium-to-high range of material thicknesses. The laser beam cuts with high precision and is free from burrs. This allows the parts to be processed further without needing to be reworked.

Tube Laser Cutting Systems Light

Coherent StarCut Tube Hybrid version gives you the most flexibility in cutting different medical devices. This is a complete turnkey laser machine that incorporates two lasers inside a compact housing.

StarCut Tube, the laser cutting system StarCut Tube, SL offers high precision, superior reliability and high performance when cutting complex medical device such as stents or aortic replacements.

Conventional Technology
Conventional Technology

Sheet laser cutting machines are now sold with laser generating technology capable of delivering as much as 12 kW of power. A laser tube cutting machine typically tops out at 5 kW because any more power would simultaneously cut through the opposite side of the tube.

Variety is the reality of any job shop, and the same goes for those that operate a tube laser. It’s not unusual to see parts of various sizes come from one tube. The machine must be able to unload laser-cut parts that may be as small as 2 in. and as long as 15 ft., one right after the other. It also must be able to unload those parts without damaging them, which can be a challenge with softer metals such as aluminum.

Tube Laser Cutting Systems Ebay

Imagine that you need to put a through-hole at the center of a tube. It must be centered to the actual dimensions, not just one. This will make things more complicated. This is how tube manufacturing works.

You may have noticed we haven’t covered cutting speed. Although you can cut up 500 inches per minute using a tube cutter, it's not always practical. Laser tube cutting involves focusing on the time required to load a tube, index the tube so it's in a good position for cutting and then pierce, cut and unload the part. It is not about cutting speed, but part-processing time when laser tube cutting machines are used.

Frequently Asked Questions

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.

What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.

from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.