A tube is very flexible and does not require a high-powered laser. Laser generators with a power output of 12 kW are now possible for flat sheet cutting machines. Tube laser cutters require a power consumption of only 5 kW. To cut a tube you must always look at the opposite end of the tube. A stronger laser would simply blow through your tube while cutting. (Officially, if the laser is processing a beam and a channel on the tube's laser, there are no need to worry about any other side.
ExactCut 430 allows for precise laser cutting of metals and alloys. It also automates the production of brittle materials like ceramics, sapphire, and PCD.
You can save time and reduce the number components. Tubular frames and metal structures are faster and more precise to assemble. You can complete your part in one programming step.
The TruLaser Tube 5000 fiber can achieve record speeds. It fully exploits the strengths of solid state lasers. This allows for faster processing times and the possibility of assembling many parts.
You will be able to see the fiber laser in action for a better understanding of some things. A fiber laser has a higher power density than a CO2 beam because its beam diameter is usually one-third of that of a CO2 beam. This allows the fiber to cut faster and pierce more quickly. The fiber can also cut intricate shapes and leave sharp edges thanks to the smaller beam size. A fiber laser can cut a logo for a company out of a tube with a spacing of 0.035 inches between letters.
Fiber lasers require little maintenance, are more efficient than traditional CO2 laser cutting machines and can cut reflective materials. They are also faster than CO2 machines for certain metal thicknesses. When it comes to cutting tubes, speed is not necessarily a good thing. You can save time by speeding up the tube processing and producing finished parts.
The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.
ExactCut 430 laser cutting machine is a precise laser cutting system that automates the processing of thin and heavy metals, alloys, brittle materials such as sapphire, PCD and ceramics.
Laser systems for electronics manufacturing are fast and high-precision and can be used to cut, mark, weld, mark, or ablate metals and other materials.
The right cutting technology for every requirement. Depending on the materials that are to be processed and the desired cutting quality and level ofproductivity, users have the choice between CO2 laser cuttingsystems and fiber laser cutting systems.
Laser combination system for sheet metal and tube cutting. Tubes up up to O 4.72 inches (120 mm).Sheets to 236"x79". (6000 mmx 2000 mm).Fiber Laser
The most productive solution to tubes of any section. Tubes upto O 6" (152.4mm).2D cutCO2 (or fiber laser).
Leaders in advanced laser-cutting solutions and CNC controls.
Monaco high power femtosecond lasers provide excellent edge quality for micromachining. They also offer improvements in scientific application like three-photon microscopicscopy.
Pipe and tubing Cutting Procedures:
Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.
What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.