Spindle

Cnc Drill Line Generator

Yes. There are many CNC Drill Lines outside. Weather protection must be provided for the control panel as well as the mobile platform. For photos of many of our outdoor installations, please contact us.

The Advantage-2 is powered with 25 HP (18.5kW), Siemens spindle motors. Each drill spindle has 5-station tool changers. This advanced drilling technology ensures maximum operating time, drill hole quality and efficiency.

Cnc Drill Line Generator

The Advantage-2 CNC beam is a powerful tool for material handling and precision measurement. This machine can be used in tandem with any Voortman’s automatic sawing systems.

Z-Reader Probe-- The Z-Reader Probe can be used to locate the surface. It can be used to programmatically or manually. This option is not activated while cutting and is easily retracted. It can be used to verify the surface of each pierce, or to map the entire surface before cutting begins. It starts by initializing or zeroing the device to a surface at the start of a program. After that, it accumulates or tracks any difference.

Cad/cam Software

Cad/cam Software

Voortman technicians will complete the installation and calibration of your machine. After that, he'll spend time with operators and guide them through our comprehensive training program. Training will be given to your operators in:

Material handling helps tie multiple CNC machines together and keep material flowing through a shop allowing fabricators to continually grow as their business expands. The Advantage-2 high-speed drill line alone processes up to 150 tons of steel on average per 40-hour workweek. The ideal drill line for small to large fabricators the world over. Full stop. The success of the steel industry is Voortman' top priority. That is why our service and support is unmatched. Request a demo, quote, visit or call to learn more about the toughest steel fabrication machinery in the world. This is Voortman and we are stronger than steel.

Cnc Drill Line Oz

The CNC Drill Line has two options: it can be programmed in-house or at work using the Peddimat programming software. This software comes as part of the AVENGER. The unlimited license allows you to install it on as many machines in your workplace as you'd like. It's the same software found on your machine.

"..We have drilled approximately 25,000 hole since we purchased our CNC Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

Cnc Drill Line Oz

Powerful Drilling Technology

The CNC Beam Drill Line was a huge hit with small- to medium-sized fabricators who produce both structural steel and other miscellaneous materials. More than 600 CNC Drill Lines have been installed since 2003. This amazing machine has made a significant impact on the lives of many steel fabricators.

Voortman built the CNC Drill Line only for GSS Machinery. Voortman manages the installation, warranty, service and maintenance of the CNC Drill Line. Voortman is the service provider. GSS Machinery is available to help if needed.

Boring Cycle

Let's examine the real world fabrication situation and compare Insert Drill Bits with Twist Drill Bits. We'll only look at one example: 13/16 inches (22mm) is the most widely drilled hole.

Your operator will be trained in Peddimat. You might have customers who bring a couple of pieces with them.

Cnc Drill Line Oz

Check our other pages :

Computer-aided Design

You may choose between a Vertical Machine Center and a CNC router when choosing the CNC machine you want. Both of these pieces can be used for many purposes. Which one should you use?

The ability to mill copes speeds up project completion times tremendously. Coupled with the Advantage-2 user-friendly Raptor 3D CAD/CAM software enables the operator to program parts quickly. Inspect, modify and export part information directly within the 3D platform. The biggest advantages of the Advantage-2 drill has been probably the scribing and the ability to mill slots, large lifting holes. I mean this really kind of sets this machine apart. With the scribing we're able to put piece marks and layout lines, center points. I mean having that flexibility to use it when we want to and make that decision has been really great.

Frequently Asked Questions

The Flange of the L-beam, or the T-beam's slab that acts in unison with the beam to resist loads, is also known as the Flange of the Slab. The beam below the flange can be called Web or Rib. The T-beams support the slab, while the L-beams are the end beams.

The beam drill line is important in large-sized structural fabrication shops. These machines are used to drill precise holes in beams, angles, or sections of bar stock. They can be quick and efficient at laying large structural members.

Drill Lines Wire Rope Bright drill lines are made from a multi-threaded, twisty wire rope. It is specially designed for drilling rigs as well as hoisting and lowering the drill pipes through a wellbore. As it is constantly in motion, the wire rope construction is very durable and resists abrasion.

Type and size of member allowed Concentrated Load ( lbs ), At Center Of Span( ft.) Single Angle 5"x3"x3/8"2100 Single Angle 6",4"x4"x3/8"3140 Single Channel 4"@ 5.4 #1510 Single Channel 5"@ 6.7 #2290 15 more rows

There are some guidelines and rules. According to IS 456:2000, the minimum thickness of RCC beams should not be less that 9'' (230mm). Therefore, RCC beams must be at least 9'' (230mm thick). Concrete grade M20 with T12 as tension bar at bottom and T10 at the top is recommended.