Material

H Drill

Voortman technicians will complete the installation and calibration of your machine. After that, he'll spend time with operators and guide them through our comprehensive training program. Training will be given to your operators in:

Material handling helps tie multiple CNC machines together and keep material flowing through a shop allowing fabricators to continually grow as their business expands. The Advantage-2 high-speed drill line alone processes up to 150 tons of steel on average per 40-hour workweek. The ideal drill line for small to large fabricators the world over. Full stop. The success of the steel industry is Voortman' top priority. That is why our service and support is unmatched. Request a demo, quote, visit or call to learn more about the toughest steel fabrication machinery in the world. This is Voortman and we are stronger than steel.

The CNC Drill Line has two options: it can be programmed in-house or at work using the Peddimat programming software. This software comes as part of the AVENGER. The unlimited license allows you to install it on as many machines in your workplace as you'd like. It's the same software found on your machine.

"..We have drilled approximately 25,000 hole since we purchased our CNC Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

Drilling Machine

Drilling Machine

The CNC Beam Drill Line was a huge hit with small- to medium-sized fabricators who produce both structural steel and other miscellaneous materials. More than 600 CNC Drill Lines have been installed since 2003. This amazing machine has made a significant impact on the lives of many steel fabricators.

Voortman built the CNC Drill Line only for GSS Machinery. Voortman manages the installation, warranty, service and maintenance of the CNC Drill Line. Voortman is the service provider. GSS Machinery is available to help if needed.

Cnc Drill Line Ground

The Advantage-2 CNC beam is a powerful tool for material handling and precision measurement. This machine can be used in tandem with any Voortman’s automatic sawing systems.

Z-Reader Probe-- The Z-Reader Probe can be used to locate the surface. It can be used to programmatically or manually. This option is not activated while cutting and is easily retracted. It can be used to verify the surface of each pierce, or to map the entire surface before cutting begins. It starts by initializing or zeroing the device to a surface at the start of a program. After that, it accumulates or tracks any difference.

H Drill
Cnc Drill Line Ground

Cnc Drill Line Of

Let's examine the real world fabrication situation and compare Insert Drill Bits with Twist Drill Bits. We'll only look at one example: 13/16 inches (22mm) is the most widely drilled hole.

Your operator will be trained in Peddimat. You might have customers who bring a couple of pieces with them.

Cnc Drill

Voortman is the only manufacturer of the CNC Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.

Renishaw Calibration 5-Axis - The calibration unit for the Renishaw model APCA45 is equipped with a modified spherical pencil. The activation process is completed with a retractable covering and an air purge. It attaches on a swing arm controlled via a pneumatic Rotary.

Cnc Drill Line Ground

Check our other pages :

Cnc Drill Line Vinyl

Voortman exclusively designed and built the CNC Drill Line to fit GSS Machinery. Voortman oversees all aspects of the CNC Drill Line, including warranty and service. Voortman acts as the service provider. GSS Machinery will always assist should the need arise.

We have successfully installed over 1000 CNC Drill Lines and Angle Lines all around the world. It has been our experience that an average operator who has never programmed a machine before can get up to 50% efficiency on it in less than half a day.

Frequently Asked Questions

C or Channel Beams. Channel beams are typically used to support lighter loads. They are a popular choice for residential construction and not for heavy construction.

As a minimum beam diameter, all structural engineers recommend a 12mm dia bar.

The dimensions of the steel bars required for beam and column are determined by the design structure, load on it, and span between two supports. For beam and column, the size of steel bars is generally 12mm to 25mm.

To increase your beam's bending capability, you will need to increase the second moment (I) if your beam design is controlled by yielding in bend (not lateral-torsional or plate buckling). This is usually done by attaching additional plates to your beam, often onto the flanges.

How big a beam should span 24 feet? A 4 nailed 2x18, 4-2x18, or 8x18 wood beam will allow you to span 24ft. For a span of 24 feet, you'll need at least 4-2x18 or 8x18 wood beams.