From small fabrication shops to massive lights-out operations, our laser automation experts will work with you to determine the right combination of machines, storage towers, product carts, and break-in stations.
Refraction bends the light in an optical laser. An optical fiber cable carries the light through a transparent, silica-free core. The core is coated with cladding. Cladding is another layer of silica doped in additional materials to lower the refractive index. Because they have a different refractive Index, the light will become refracted at their core-clad interface.
Strengthen the close connection with upstream and downstream enterprises in the supply chain to form a highly competitive and concentrated CNC cutting machine business circle. For some laser cutter manufacturers, it is of great significance to enhance their competitiveness and expand market share. Focus on product structure optimization, product quality improvement, core technology mastery and innovation, and the expansion of corporate brand influence.
The laser used is a laser pulsed fiber laser having a wavelength of 1064nm. It can last approximately 25,000+ hours.
The High Speed SKYWAY delivers all of the cost saving advantages of the previous sorting system, but with unmatched performance.
FSL Muse Pandora allows you to raster engrave on aluminum and steel as well as nickel, copper or silver.
The FLCAJ’s fiber engine, combined with the fiber optic delivery cable, has greatly reduced machine operating costs and required maintenance. With no laser gas, mirrors, or moving parts in the laser source, and by consuming a fraction of the energy required by a comparable CO2 laser, the FLCAJ series makes laser processing more economical than ever before.
FSL Muse Pandora, 20W, can deep engrave Silver at a speed of 708 IPM using 100% laser power.
F-theta(?) is the laser module's electromagnetic radiation. The laser module uses an F-theta(?) lens that has high energy uniformity, narrow focus spots, and low attenuation.
Laser uses light to cut steel. For metal piercing and cutting, light must be concentrated to one point. A magnifying glass can be used to focus the sun's rays onto one point, and then it can be burned. This is how cutting using light works.
Fiber lasers have a wide range of uses for engraving on metals. They can engrave with greater precision than CO2 lasers.
Fiber Lasers, manufactured by Gulf States Saw & Machine Co. provide consistent, accurate metal cutting. They can also be used to significantly improve production and quality.
Fiber lasers can be expensive so if you are looking for a low-cost laser engraver, you should consider diode lasers.
Plasma can also cut ceramics and glass. Because plasma is electrically conductive, it cannot cut things like wood or plastic.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.
The wavelength is the primary distinction that determines the types of materials that each laser can process. The wavelength of a fiber laser is typically 1,060 nm, whereas CO2 lasers have wavelengths in the 10,600 nm range. Fiber lasers have many advantages over CO2 lasers in general.