With a 30W fiber laser, you can engrave on stainless steel at a 90° angle with a speed of ~3,543 ipm by utilizing 100% of the laser power.
This means that fiber laser light will be absorbed at a higher rate by metals than CO2 lasers when they are working with them.
FSL Muse Pandora comes pre-assembled. Connect it to the appropriate accessories and turn it on.
If most of your production is cutting thin metals up to 25mm, then a fiber laser cutter will be ideal.
It simply means that, when working in materials such as metals that reflect laser light, they absorb fiber light at a much greater rate than the laser light generated from CO2 lasers.
Gulf States Saw & Machine Co. FM1212-50S uses a Raycus solid-state 50W fiber laser. The fiber source has a life expectancy of 100,000 hours.
FM-Desktop can engrave in acrylic, plastics or brick, PVC and granite. It also has the ability to engrave tile, tile, silver, steel, brass, as well as titanium.
Just know that the running cost of plasma is lower than laser. In general, it cost about 15/hr to run plasma cutting machines. It takes about 20/hr to run a laser machine.
Our fiber laser cutting machines can dramatically improve the efficiency of metal fabrication shops and companies who manufacture custom-made parts.
Fiber lasers, which are solid-state lasers, are used extensively in laser marking or engraving machines. The main difference between a fiber and a carbon dioxide laser is their ability to laser-cut sheet metal.
Fiber lasers use high-power laser diodes to stimulate active medium and pump optical fiber with laser light.
The air filter must be removed and cleaned regularly. Serious blockage of the air filter will cause the chiller to malfunction.
Here are a few things you should also know about laser and plasma when it comes to operation and maintenance:
Laser machines can cut all kinds of materials. The material you can cut though will depend on what kind of laser machine you have. CO2 laser machine can’t cut through reflective metals like aluminum, copper, and brass. But they can cut through nonmetallic materials like wood and plastic.
Options for payment The average laser can cost between $50,000 and $250,000, making it a significant asset to a business.