It simply means that, when working in materials such as metals that reflect laser light, they absorb fiber light at a much greater rate than the laser light generated from CO2 lasers.
Gulf States Saw & Machine Co. FM1212-50S uses a Raycus solid-state 50W fiber laser. The fiber source has a life expectancy of 100,000 hours.
Here are a few things you should also know about laser and plasma when it comes to operation and maintenance:
Laser machines can cut all kinds of materials. The material you can cut though will depend on what kind of laser machine you have. CO2 laser machine can’t cut through reflective metals like aluminum, copper, and brass. But they can cut through nonmetallic materials like wood and plastic.
The support column (Z-axis) holds the laser arm. The laser focus can be adjusted by moving the Z-axis using the height adjustment knob.
A fiber laser is a great choice for engraving. It can mark,etch, and engrave with metals at an amazing speed.
The beam quality of 20W and 30W lasers are less than 1.5 M2, for the 50W laser it is less than 1.8 M2.
The laser beam is then amplified by a flexible optical fiber, which is fed to the cutting machine.
FSL Muse Pandora comes pre-assembled. Connect it to the appropriate accessories and turn it on.
If most of your production is cutting thin metals up to 25mm, then a fiber laser cutter will be ideal.
Fiber lasers use high-power laser diodes to stimulate active medium and pump optical fiber with laser light.
The air filter must be removed and cleaned regularly. Serious blockage of the air filter will cause the chiller to malfunction.
For engraving larger areas, you will need a 30-W or 50W laser fiber to upgrade to 7.87"x7.87", or 11.81"x11.87".
Contact after-sales via phone, email or social media.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.