The laser module has a life of 100,000+ hours and can engrave with a repetitive precision of ±0.00039".
MCWlaserPRO can be purchased in half pre-assembled. First, fix the vertical columns connecting the laser source module and the laser engraver modules.
When buying safety glasses for this machine, make sure to buy one which is designed to block 1064 nm laser light.
It’s the perfect solution for fabricators facing worker shortages and bottlenecks resulting from the increased productivity of higher-volume fiber lasers.
Triumph's 30W desktop fiber-laser gives you two lenses. One lens gives a 4.3"x4.3", the other gives a 7.8”x7.8” engraving surface.
You can begin your first job once you have access to the machine via RetinaEngrave 3.0. This can all be done in 30 minutes.
Raycus 50W fiber-laser can mark or etch in aluminum at a angle of 90° using 100% of its laser power.
F-theta(?) is used by the laser module. A lens with high energy uniformity, narrow focal spot and low attenuation.
FM-Desktop a mobile machine that engraves on a 33.5" by 24.5" area. It can mark an area of 4.33 inches x 4.33 inches, making it ideal for smaller projects like laser engraving knives.
Engraving applications are where a fiber laser shines. It can mark, etch, and engrave on metals at an incredible speed.
Fiber lasers can also cut through reflective materials, provided they have enough power. With enough power, they can cut through almost any metal. Their cutting power will limit their ability to cut through thicker metals.
There is not much of an upgrade option available once you purchase MCWlaser PRO, but you can customize it while purchasing.
Gulf States Saw & Machine Co. - FM1212-50S doesn't come assembled. However, the modules are easily attachable by consulting their user manual.
Mirror galvanometers, also known as laser engravers or laser cutters, are a series mirrors that move fast to change the laser's path. A rotation of just 10 degrees at the top of the head will produce 1 1/4 inches of movement at 10 inch. It can also serve to trace laser paths before cutting or engraving.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
Fiber lasers typically cost between $20,000 and $45,000.
What Materials Can Be Cut With A Fiber Laser? A fiber laser cutting machine can cut sheet metal such as carbon steel, stainless steel, copper, brass, aluminum, and titanium. Fiber lasers outperform CO2 lasers in cutting reflective materials.