It simply means that, when working in materials such as metals that reflect laser light, they absorb fiber light at a much greater rate than the laser light generated from CO2 lasers.
Gulf States Saw & Machine Co. FM1212-50S uses a Raycus solid-state 50W fiber laser. The fiber source has a life expectancy of 100,000 hours.
FM-Desktop can engrave in acrylic, plastics or brick, PVC and granite. It also has the ability to engrave tile, tile, silver, steel, brass, as well as titanium.
Just know that the running cost of plasma is lower than laser. In general, it cost about 15/hr to run plasma cutting machines. It takes about 20/hr to run a laser machine.
With a 30W fiber laser, you can engrave on stainless steel at a 90° angle with a speed of ~3,543 ipm by utilizing 100% of the laser power.
This means that fiber laser light will be absorbed at a higher rate by metals than CO2 lasers when they are working with them.
Even though fiber lasers are solid-state lasers, fiber lasers are different from diode lasers and there is a significant difference in their capabilities.
Finally, the laser beam is shaped at the cutting head using focus lenses and is projected on the work materials.
Amazon offers a 30-day return policy.
Some acrylic that is made of PVC emits toxic fumes when it is heated. You should always verify the chemical composition of the materials that you are going to engrave.
EZCAD 2.0 software is free to use on Microsoft Windows XP and Windows 2000. It can also be used with WIN 7, WIN8, and WIN 10 OS.
Laser machines using a fiber source laser use high precision field lens to increase the energy density of the laser beam and collimate it at one point.
Our fiber laser cutting machines can dramatically improve the efficiency of metal fabrication shops and companies who manufacture custom-made parts.
Fiber lasers, which are solid-state lasers, are used extensively in laser marking or engraving machines. The main difference between a fiber and a carbon dioxide laser is their ability to laser-cut sheet metal.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.