After-sales service can be contacted by phone, email or via their social media profiles.
LaserWorks or RDWorks software are used to control the machine. You can get them free from their websites.
Triumph Laser supplies EZCAD2.0 software to control their desktop laser engraver. EZCAD2.0 is capable of creating basic shapes as well as text.
Boss Laser provides lifetime technical support for their customers through their engineers and technicians.
MOPA fiber laser is a special type of fiber laser that allows for greater control over the pulse width and frequency parameters. This laser can be used to color laser engravings on metals.
Our machines can easily cut stainless steel, brass as well as aluminum and brass without the fear of back reflections. These fiber lasers machines will greatly reduce maintenance and operational costs.
However, fiber lasers are expensive and if you need a cheap laser engraver you will have to consider going for diode type lasers.
Our machines are capable to cut steel, brass or aluminum with no back reflections. These fiber laser machine will significantly reduce your maintenance requirements as well as your operating cost.
Fiber laser machines can cut thin metals more efficiently than others when it comes to cutting. A fiber laser machine can efficiently cut thin metals up 25mm or 1 in. Then, fiber lasers begin to cut metal less efficiently. For cutting ticker metals greater than 25mm, or even 1 inch, you will need a lot of power. This is why it costs a lot more.
The machine is controlled using RDWork or LaserWorks software. You can download them freely from their respective website.
You can access the software interface by entering your IP address in the address bar of the browser.
Thanks to our wide range of options—including configurations that require 30% less floor space than typical laser automation setups—we have solutions for any application.
They also offer a 30-day returns policy and a 2-year parts guarantee for all components, including the fiber laser in FM–Desktop.
Triumph's desktop fiber laser 30W can provide two lenses. The one gives you a 4.3"x4.3" engraving area, while the other allows for a 7.8”x7.8” engraving area.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.
Laser fiber cutting machine
Fiber optic laser cutters are intended to cut metal at high speeds and with pinpoint accuracy. These machines, which have been on the market for more than 20 years, also use a fiber laser power source.
Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.