Metal

Fiber Laser Cutting Machine Application

Amazon does not have an official return policy. However, you can get a replacement within 30 days if you order through Amazon.

Even though fiber lasers are solid-state lasers, fiber lasers are different from diode lasers and there is a significant difference in their capabilities.

At the heart of a fiber laser is the laser source and they do not have any gaseous medium in it like in a CO2 laser.

Gulf States Saw & Machine Co.'s FM1212-50S comes unassembled. You can attach it by reading the user manual.

High Speed

High Speed

Triumph's desktop fiber laser 30W can provide two lenses. The one gives you a 4.3"x4.3" engraving area, while the other allows for a 7.8”x7.8” engraving area.

You won't have to worry about any leftover cutting residue, such as dross, if the laser cutting parameters are correct.

Lasing

The air filter must be removed and cleaned regularly. Serious blockage of the air filter will cause the chiller to malfunction.

You can reach the software interface by entering the IP address of your computer in the browser's Address Bar.

Lasing

Fiber Laser Operator Salary

Plasma science can seem complicated. I'll try to make it as simple and quick as possible. Plasma cutters heat the gas enough to melt it. After the metal has been heated enough to melt, it can be blown with gas to make a cut. There is much more to this process, but that's for another day. (Or, you can conduct your own research, if desired).

This laser is a pulsed laser fiber laser with 1064 nm wavelength. It has a life expectancy of approximately 25,000 hours.

What are the 5 types of lasers

1. It has higher electro-optical conversion efficiency, which is more than 30%. The low-power laser machine has no need of a chiller. The air cooling will greatly save power consumption during operation, save costs, and achieve the highest manufacturing efficiency, 2. It only requires electrical energy during operation without additional gas, which has the lowest operation and maintenance costs, 3. It adopts semiconductor modular and redundant design. There is no optical lens in the resonant cavity, no start-up time, and it has the advantages of no adjustment, maintenance, and high stability. It reduces the cost of accessories and maintenance time, 4. The fiber laser wavelength is 1.064 microns, which makes the laser beam with high quality and high power density. It is very conducive to the absorption of metal materials, 5. The optical transmission of the whole machine is through optical fiber, no complicated light guide system such as reflecting mirror is needed, the optical path is simple, the structure is stable, and the external optical path is maintenance-free., 6. The cutting head contains a protective lens, which makes the consumption of expensive consumables such as focusing lenses extremely small, 7. The light is exported through the optical fiber, which makes the design of the mechanical system very simple, and it is very easy to integrate with the robot or multi-dimensional workbench, 8. After the laser is added with the optical shutter, it can be multi-machine, split through the optical fiber, divided into multiple channels and work simultaneously, easy to expand the function, easy and simple to upgrade.

The support column (Z-axis) holds the laser arm. The laser focus can be adjusted by moving the Z-axis using the height adjustment knob.

Fiber Laser Cutting Machine Application
Lasing

Check our other pages :

Fiber Laser Welding Machine Alibaba

All kinds of materials can be cut with laser machines. It is dependent on which type of laser machine your have that will allow you to cut different materials. Laser machines that use CO2 can't cut through reflective metallic materials such as brass, copper and aluminum. However, they are capable of cutting through nonmetallic materials like plastic and wood.

Raycus 50W fiber-laser can be used to engrave steel at 90 degrees angles. It uses 100% of the laser's power.

Frequently Asked Questions

Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.

In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.

Applications for the 50 Watt Fiber Laser Deep Engraving Machine:

Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.